Subsite 830R/T Cable & Pipe Utility Locator
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Subsite 830R Receiver (BC# - L/T*)
- Subsite 830T Transmitter (BC# - L/T*)
- Direct Connect Leads
- Carrying Case (G)
Subsite 830R/T Cable & Pipe Utility Locator
The Subsite 830R/T Cable and Pipe Utility Locator is a portable system used to locate and trace buried metallic pipes, cables, and conductive utility lines. It consists of the 830R receiver and 830T transmitter, which work together to help operators follow a utility’s underground route. The system supports utility maintenance, construction, landscaping, and water and gas distribution work.
The transmitter applies a locating signal to the target line through direct connection, an inductive clamp, or induction from above ground. The receiver detects the resulting electromagnetic field, allowing the operator to trace the line along the surface. Its active frequency is approximately 83 kHz, providing high-frequency locating capability for applications that include tracing relatively poor conductors. Nonmetallic pipes require a suitable conductive tracing path, such as tracer wire.
The 830R receiver provides visual and audible left/right guidance to help the operator determine the line’s position. Automatic depth readings provide an estimate of how far below the receiver the located line lies. Adaptive filtering helps the instrument respond quickly as the operator moves, while the backlit display makes information easier to read in changing light conditions.
A key feature is Peak Verify mode, which gives operators an additional way to check a locate before marking the route. Depending on the receiver’s configuration, passive locating modes can also detect certain existing power-related signals without applying the transmitter’s active signal. These functions help operators investigate a target line and assess the consistency of their locating results.
Built for field use, both the receiver and transmitter carry an IP65 environmental rating for protection against dust and water jets. The manufacturer lists battery life of approximately 75 hours for the receiver and 150 hours for the transmitter, supporting extended work between battery changes. With straightforward operation, directional guidance, and depth estimation, the 830R/T helps crews trace buried utilities and plan work around their approximate locations.
Features:
- Receiver and transmitter system: Includes the 830R receiver and 830T transmitter for tracing buried conductive pipes and cables.
- 83.08 kHz active frequency: Supports high-frequency utility locating, including relatively poor conductors.
- Three signal application methods: Direct connection, inductive clamping with a compatible clamp, and broadcast induction.
- Visual and audible left/right guidance: Helps operators follow the utility’s underground route.
- Automatic depth readings: Estimates the depth of the located line.
- Peak Verify mode: Provides an additional way to check the locate.
- Adaptive filtering: Delivers responsive guidance as the operator moves.
- Backlit display: Improves readability in low-light conditions.
- Passive locating capability: Detects supported power-related signals, depending on receiver configuration.
- Adjustable transmitter output: Three power settings, with a maximum output of 1 watt.
- Long battery life: Approximately 75 hours for the receiver and 150 hours for the transmitter.
- Replaceable batteries: Receiver uses two D-cell batteries; transmitter uses six D-cell batteries.
- IP65 protection: Resists dust and water jets.
- Operating temperature range: −4°F to 122°F (−20°C to 50°C).
- Simple, portable operation: Designed for utility, construction, landscaping, and maintenance work.
| Specification | 830R Receiver | 830T Transmitter |
|---|---|---|
| Manufacturer | Subsite Electronics | Subsite Electronics |
| System | 830R/T Utility Locating System | 830R/T Utility Locating System |
| Function | Detects and traces signals from buried conductive utilities | Applies a locating signal to the target utility |
| Active frequency | 83.08 kHz | 83.08 kHz |
| Passive frequencies | 50/100/150 Hz or 60/120/180 Hz | Not applicable |
| Signal application methods | Detects the applied signal | Direct connection, inductive clamp, or broadcast induction |
| Maximum output power | Not applicable | 1 watt |
| Power settings | Not applicable | Three |
| Depth reading | Automatic | Not applicable |
| Left/right guidance | Audible and visual | Not applicable |
| Peak Verify mode | Yes | Not applicable |
| Adaptive filtering | Yes | Not applicable |
| Backlit display | Yes | Not specified |
| Battery type | Two D-cell batteries | Six D-cell batteries |
| Listed battery life | Approximately 75 hours | Approximately 150 hours |
| Weight | 5.1 lb / approximately 2.3 kg | 4.6 lb / approximately 2.1 kg |
| Environmental protection | IP65 | IP65 |
| Operating temperature | −4°F to 122°F / −20°C to 50°C | −4°F to 122°F / −20°C to 50°C |
| Typical applications | Cable and pipe tracing, utility maintenance, and construction locating | Signal generation for active utility tracing |