Sunrise Telecom IDSL Module SSxDSL-5
Shipping: USA & Worldwide
SPECIFICATIONS
Connectivity
Interface:
* S/T, U
Emulation Mode:
* LT, NT, TE
Channel Data:
* Loop or terminated
BERT Test Channel:
* B1, B2, D, B1+B2 or 2B+D
Transmit Clock Setting (LT modes only):
* Internal, external U, external T1 or external E1
LT eoc Control
Sends eoc commands on the U interface in LT modes Address:
* 0 to 7 (NT1, U-Repeaters, or Global)
Command:
* Loop 2B+D, Loop B1, Loop B2, Request Corrupted CRC, Notify Corrupted CRC, Return to Normal, Hold State
eoc Bit Setting:
* Individual bit manipulation
M4 Bit Setting:
* ACT, DEA, SCO, UOA, AIB
40 kHz Tone Generation
* Sends 40 kHz tone at +13.6 dBm for line loss testing
ISDN Testing (SWxDSL-5BRIE/BRIN)
ISDN Call Setup1
Allows IDSL Module to perform ISDN Basic Access call setup
Protocols:
* AT&T 5ESS, Nortel DMS, National ISDN, ETSI
Call Types
For NA protocols:
* Speech, Data-56, Data-64, 3.1k audio
For ETSI protocol:
* Speech, Data-56, Data-64, 3.1k audio, 7k audio
Dial Method:
* Overlap or En-bloc
Answer Mode:
* Automatic or Manual, loop or terminated
Line Type:
Point-to-point or Point-to-Multipoint
Layer 2 TEI:
* Automatic or fixed
Call Type Combination:
* Any combination of sent and received calls on B1 & B2 channels, speech or data
Automated Tests
? Auto SPID Detection: Supported with National ISDN-3 protocol only. Queries the switch to obtain correct SPID.
? Guess SPID Detection (NA protocols only): Automatically test, based on phone number, to verify SPIDs on the line.
? Auto Service Scan
? For NA protocols: Automatic scan of bearer services for service availability
? For ETSI protocol: Automatic scan of bearer and teleservices for service availability including: Speech, Data-56, Data-64, 3.1k audio, 7k audio, video Tele3.1k, Tele64k, Fax G.2/3, Fax G.4, Mixmode, Processable Form, Videotex, OSI
? Auto Supplementary Service Scan (ETSI protocol only):Automatic scan of supplementary services for service availability including: DDI, MSN, CLIP, CLIR, COLP, COLR, MCID, SUB, CFU, CFB, CFNR, CW, HOLD, CUG, AOC-S, AOC-D, AOC-E, TP, UUS
? SELFBERT: Automatic setup of a Data-64 call from one B-channel to the other. Automatically answers the received call with a loopback & starts a 64k BERT.
? DUALBERT: Automatic setup of 2 independent Data-64 calls, one on each B-channel & starts a 64k BERT on each data call.
? BONDING CALL: Automatic setup of 2 Data-64 calls, one on each B-channel. Perform channel delay measurement and 128 kbps BERT after call connection.
xDSL Over D-Channel Testing
* Allows IDSL Module to perform X.25 calls over D-channel Supports CUG (Closed User Group), RPOA (Recognized Private Operating Agency), Reverse Charges, Call User Data
Interface:
* S/T, U
Emulation Mode:
* DTE
Circuit Types:
* PVC, SVC
Incoming Call Handling:
* Automatic answer with selectable echo mode for looping received data packets to the transmit
Packet Generation:
* 2 predefined data packets
Protocol Analysis (SWxDSL-5BRIPA1)
* D-channel message capturing and protocol
analysis
* Layer 2 and Layer 3 message
decoding
* Displays messages in HEX or text decoded format
with detailed decoding of information element
* Detailed
trace printing in HEX and text decoded formats via serial interface to printer
or PC
* Capture and display filters for Layer 2 only,
Layer 3 only
Operation Modes
IDSL U Interface LT-144k, LT-LOOP Modes
? Verifies Layer 1 from LT to NT
? Sends eoc maintenance commands to NT, U-repeater
? BERT either B1, B2, D, B1+B2 or 2B+D channels
? Tests to a loopback or to another test set
? Ext. clock reference from U, T1 or E1 for transmit signal
? LT-144k mode sends a test pattern and measures bit errors on the selected channel
? LT-LOOP loops the 2B+D channels at 144 kbps and measures bit errors on the selected channel
Includes:
Sunrise Telecom IDSL Module SSxDSL-5