Tektronix DSA72504D 25GHz Digital Oscilloscope w/ Opts 2XL/ASM/DJA/MTH/PCE3/PTH1
Condition: Refurbished / Calibrated
Warranty: 1 Year Warranty
Tektronix DSA72504D Oscilloscope
Digital and Mixed Signal Oscilloscopes DPO/DSA/MSO70000 Series Data Sheet
Features & Benefits
Uncompromised Bandwidth – Up to 33 GHz and rise time as fast as 9 ps on all 4 channels enables measurement on the latest high-speedserial standards
Industry-leading Sample Rate and Timing Resolution100 GS/s on 2 Channels (33, 25, 20, 16, and 12.5 GHz models)
On All Four Channels Simultaneously
33, 25, 20, 16, 12.5, 8, 6, and 4 GHz Bandwidth Models
Up to 50 GS/s Real-time Sample Rate
Up to 250 Megasample Record Length with MultiView Zoom™Feature for Quick Navigation
Fastest Waveform Capture Rate with >300,000 wfms/s Maximum perChannel
Superior Signal Integrity and Excellent Signal-to-Noise Ratio – Observe the truest representation of your waveform
16 Logic Channels with 80 ps Timing Resolution for Debug of Digital andAnalog Signals (MSO70000 Series only)
Pinpoint®Triggering – Minimize time spent trying to acquire problemsignals for efficient troubleshooting and shortened debug time
Visual Trigger – Precisely qualify triggers andfind unique events incomplex waveforms
6.25 Gb/s Real-time Serial Trigger – Assures triggering on the first instance of aspecified NRZ or 8b/10b pattern to allow isolation ofpattern-dependent effects
Search & Mark – Provides waveform or serial bus pattern matching and software triggers for signals of interest
Automated Serial Triggering and Decode Options for 8b10b EncodedSerial Data, I2C, SPI, RS-232/422/485/UART, USB 2.0, and MIPI®D-PHY
P7500 TriMode™ Probing System – Perfectly matched signalconnectivity
Application Support for High-speed Serial Industry Standards, widebandRF, Power Supplies, and Memory – Enables standard-specificcertification, measurement automation, and ease of use
P6780, P6750, and P6717A High-performance 17-channel Logic Probeswith Bandwidths up to 2.5 GHz for Connections to Today's Fast DigitalSignals (MSO70000 Series only)
Applications
Design Verification including Signal Integrity, Jitter, and Timing Analysis
Design Characterization for High-speed, Sophisticated Designs
Certification Testing of Serial Data Streams for Industry Standards
Memory Bus Analysis and Debug
Prototype Turn-on and Power Supply Verification
Research and Investigation of Transient Phenomena
Production Testing of Complex Systems
Spectral Analysis of Transient or Wide-bandwidth RF Signals
Tools for Your Complete Design Cycle
Tektronix understands that engineers rely on an oscilloscope through out their design cycle, from prototype turn-on to production testing. The DPO/DSA/MSO70000 Series oscilloscopes' unique capabilities combined with exceptional signal acquisition performance and analysis accelerate your measurement tasks.
Unmatched Acquisition and Signal-to-Noise Performance
The superior signal integrity and excellent signal-to-noise ratio of theDPO/DSA/MSO70000 Series ensures confidence in your measurementresults.
High bandwidth, up to 33 GHz, matched across 4 channels
Bandwidth enhancement eliminates imperfections in frequencyresponse all the way to the probe tip. User-selectablefilters for eachchannel provides magnitude and phase correction for more accuraterepresentation of extremely fast signals. In addition, only Tektronixallows the user to disable the bandwidth enhancement for applicationsneeding thehighest measurement throughput
Simultaneous high sample rate on all channels captures more signaldetails (transients, imperfections, fast edges)100 GS/s on 2 channels and 50 GS/s on all analog channels for the12.5 through 33 GHz models25 GS/s on all analog channels for the 4, 6, and 8 GHz models12.5 GS/s on all logic channels in the MSO70000 Series
Lowest jitter noisefloor and highest vertical accuracy provide additionalmargin in your measurements
Long record length provides high resolution and extended-durationwaveform capture
Standard 10 MS per channel on the DPO70000 and MSO70000Series and 31 MS on the DSA70000 Series
Optional up to 125 MS on all four channels for the 4, 6, and 8 GHzmodels
Optional up to 250 MS on all four channels for the 12.5 through 33 GHz models
On the MSO70000 Series, the record length of logic channelsmatches the analog record lengths for uncompromised analog anddigital acquisition
MultiView Zoom helps you manage long records, compare andanalyze multiple waveform segments
With high signal-to-noise ratio and low internal noise floor, theDPO/DSA/MSO70000 Series enable you to perform precise characterization measurements. When debugging a DUT, a low noise floor and maximum signal fidelity of the measurement instrument allows you to find the smallest anomalies affecting the DUT's performance.For RF signals, a lower noise floor translates into a higher dynamic range, opening the DPO/DSA/MSO70000 Series to a wider range of applications
Widest Range of Probing Solutions – Whether you need to measure 8 Gb/sserial data, fast digital logic, or switching currents from your new powersupply design, Tektronix offers a vast array of probing solutions, includingactive single-ended, differential, logic, high voltage, current, optical, and awide range of probe and oscilloscope accessories.
| Characteristics Vertical System | DSA72504D |
| Bandwidth (User-selectableDSP enhance) | 25 GHz |
| Hardware AnalogBandwidth (–3 dB) | 25 GHz |
| Input Channels | 4 |
| Rise Time 10% to90% (Typical) | 16 ps |
| Rise Time 20% to 80% (Typical) | 12 ps |
| Vertical Noise(% of full scale)(Typical)*1 | 0.58% |
| Bandwith Limits | Depending on instrument model: 32 GHz to 1 GHz in 1 GHz steps, or 500 MHz Hardware-only bandwidth settings at 33, 25, 20, and 16 GHz |
| Channel-to-Channel Isolation (Any two channels at equal vertical scale settings) | ≥120:1 (for input frequency 0 to 10 GHz)≥80:1 (for input frequency >10 GHz to 12 GHz) ≥50:1 (for input frequency >12 GHz to 15 GHz)≥25:1 (for input frequency >15 GHz) ≥20:1 (for input frequency >20 GHz to 33 GHz) |
| DC Gain Accuracy | ±2% (of reading) |
| Delay between Any Two Channels (Typical) | ≤10 ps for any two channels with equal V/div and coupling settings |
| Effective Number of Bits (Typical) | 5.5 bits*2 |
| Signal to NoiseRatio (Typical) | 34 dB |
| Input Coupling | DC (50Ω), GND |
| Input Impedance | 50Ω±3%, 1 MΩwith TCA-1MEG adapter |
| Input Sensitivity | |
| 18 GHz and below | 10 mV/div to 500 mV/div (100 mV to 5 V full scale |
| 20 GHz and 19 GHz | 20 to 500 mV/div (200 mV to 5 V full scale) |
| 33 GHz and below | 6.25 mV/div to 120 mV/div (62.5 mVto 1.2 V full scale) |
| Max Input Voltage, 50Ω*3 | 1.2 VRMS |
| Offset Accuracy10 mV/div –99.5 mV/div± | (0.35% (offset value-position) + 1.5 mV + 1% of full scale) |
| 100 mV/div –500 mV/div.± | (0.35% (offset value-position) + 7.5 mV + 1% of full scale |
| Offset Range | +3.4Vto–3.4V |
| TerminationVoltage Range+3.4Vto–3.4V | +3.4Vto–3.4V |
| PassbandFlatness (20, 50,100, 250 mV/div)(Typical) | ±0.5 dB to 50% of nominal bandwidth |
| Position Range | ±5 div |
| Vertical Resolution | 8 bit (11 bit with averaging) |
| (*1) 50 mV/div, bandwidthfilter on, max sample rate. (*2) 50 mV/div, bandwidthfilter on, max bandwidth up to 13 GHz, max sample rate. (*3) Also determined by TekConnect accessory. |
|
| Horizontal Time Base System | |
| Time Base Range | 10 ps/div to 1000 s/div |
| Time Resolution(in ET/IT mode) | 100 fs |
| Channel-to-Channel Deskew Range | ±75 ns |
| Delta Time Measurement Accuracy RMS over <100 nsDuration; Single Shot; with Signal Rise Time = 1.2 ×Scope RiseTime*4 | 330 fs |
| Jitter Noise Floor(Typical) (With BW bandwidth enhance enabled) | <250 fs |
| Time Base Accuracy | ±1.5 ppm initial accuracy, aging <1 ppm per year |
| Time Base Delay Time Range | –5.0 ks to 1.0 ks |
| Trigger Jitter(RMS) | 1ps RMS (typical) with enhanced triggering off <100 fs RMS with enhanced triggering on |
(*4)100 mV/div, bandwidth filter on, max sample rate. |
|
| Acquisition System | |
| Sample Rates | |
| Real-time Mode 1,2 Channel (Max) | 100 GS/s*5 |
| Real-time Mode 1,2, 3, or 4 Channel(Max) | 50 GS/s |
| ET/IT Mode (Max) | 10 TS/s |
| Maximum Record Length per Channel | |
| With Standard Configuration | 10M on all four channels (DPO70000 and MSO70000 Series)31.25M on all four channels (DSA70000 Series only |
| With Record Length Option 2XL | 31.25M on all four channels (DPO70000 and MSO70000 Series) |
| With Record Length Option 5XL | 62.5M on all four channels |
| With Record Length Option10XL | 125M on all four channels |
| With Record Length Option20XL | 250M on all four channels |
| Maximum Duration at Highest Real-time Resolution | |
| Timing Resolution | 10 ps (100 GS/s) |
| 0.4 ms DPO70000 and MSO70000 Series | 0.1 ms DPO70000 and MSO70000 Series0.31 ms for DSA70000 Series |
| Max Duration with Option 2XL | 0.31 ms (DPO70000 and MSO70000 Series) |
| Max Duration with Option 5XL | 0.63 ms |
| Max Duration with Option 10XL | 1.3 ms |
| Max Duration with Option 20XL | 2.5 ms |
| (*5)Maximum sample rate is 50 GS/s on digital channels routed to an analog channel through the iCapture analog mux | |
| Acquisition Modes | |
| Averaging | From 2 to 10,000 waveforms can be included in an average waveform |
| Envelope | From 1 to 2×109 waveforms included in min-max envelope |
| FastAcq | FastAcq optimizes the instrument for analysis of dynamic signals and capture of infrequent events |
| Maximum FastAcq Waveform Capture Rate | >300,000 wfms/s on all 4 channels simultaneously |
| FastFrame™ | Acquisition memory divided into segments; maximum trigger rate >310,000 waveforms per second. Time of arrival recorded with each event. Frame finder tool helps to visually identify transients |
| Hi-Res | Real-time boxcar averaging reduces random noise and increases resolution |
| Peak Detect | Captures and displays narrow glitches at all real-time sampling rates. Glitch widths: 1 ns at≤125 MS/s; 1/sample rate at ≥250 MS/s |
| Roll Mode | Scrolls sequential waveform points across the display in a right-to-left rolling motion. Works at sample rates up to10 MS/s with a maximum record length of 40 MS |
| Sample | Acquires and displays sampled values |
| Waveform Database | Accumulates waveform data providing a three-dimensional array of amplitude, time, and counts |
| Pinpoint®Trigger System Sensitivity | |
| Internal DC Coupled | 4% of full scale from DC to 50 MHz 10% of full scale at 4 GHz 20% of full scale at 8 GHz 50% of full scale at 11 GHz |
| External (Auxiliary Input) 50Ω | 250 mV from DC to 50 MHz, increasing to 350 mV at 1.0 GHz |
| Trigger Characteristics | |
| A Event and Delayed B Event Trigger Types | Edge, Glitch, Runt, Width, Transition Time, Timeout, Pattern, State, Setup/Hold, Window – all exceptEdge, Pattern, and State can be Logic State qualified by up to two channels |
| Main Trigger Modes | Auto, Normal, and Single |
| Trigger Sequences | Main, Delayed by Time, Delayed by Events, Reset by Time, Reset by State, Reset by Transition. All sequences can include a separate horizontal delay after the trigger event to position the acquisition window in time |
| Trigger Coupling | DC, AC (attenuates <100 Hz) HF Rej (attenuates >20 kHz) LF Rej (attenuates <200 kHz) Noise Reject (reduces sensitivity) |
| Trigger Holdoff Range | 250 ns min to 12 s max |
| Trigger Level Range Internal | ±120% of full scale from center of screen |
| Clock Recovery System | Standard |
| Clock Recovery Phase Locked Loop Bandwidth | Fixed at FBaud/1600 |
| Clock Recovery Jitter | (RMS)<0.25% bit period + 2 psRMSfor PRBS data patterns <0.25% bit period + 1.5 psRMSfor repeating "0011” data pattern |
| Minimum Signal Amplitude needed for Clock Recovery | 1 divp-pup to 1.25 Gbaud 1.5 divp-pabove 1.25 Gbaud |
| Tracking/Acquisition Range | ±2% of requested baud |
| Clock Recovery Frequency Range | 1.5 MBaud to 3.125 GBaud |
| Serial Pattern Trigger | Up to 64 bit serial word recognizer, bits specified in binary (high, low, don't care) or hex format.Trigger on NRZ-encoded data up to 1.25 GBaud |
| 8b10b Max Baud Rate | 6.25 Gbaud |
| Pattern Length | 1-4 valid, 10-bit characters |
| Alignment Character | K28.5 (either disparity |
| Communications-related Triggers | Support for AMI, HDB3, BnZS, CMI, MLT3, and NRZ encoded communications signals. Select among isolatedpositive or negative one, zero pulse form, or eye patterns as applicable to the standard |
| Visual Trigger | Requires Option VET |
| Max Number of Areas | 8 |
| Area Shapes | Rectangle, Triangle, Trapezoid, Hexagon |
| Compatibility | Visual Trigger qualification is compatible with all trigger types and all trigger sequences |
| Trigger Types Analog Channels MSO Logic Channels | |
| Comm X | Support for AMI, HDB3, BnZS, CMI, MLT3, and NRZ encoded signals. Standard feature on the DSA70000Series, provided as part of Option MTH on the DPO70000 and MSO70000 Series |
| Bus Analog Channels MSO Logic Channels | Trigger on a parallel or serial bus when the specific bus value is found |
| I2C Analog Channels MSO Logic Channels | Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Address and Data |
| SPI Analog Channels MSO Logic Channels | Trigger on SS or data |
| RS-232/422/485/UART Analog Channels MSO Logic Channels | Trigger on Start Bit, End of Packet, Data, and Parity Error |
| USB Analog Channels MSO Logic Channels | Low-speed or Full-speed: Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special Packet, Error |
| Edge Analog Channels MSO Logic Channels | Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes DC, AC, noise reject, HF reject, and LF rejec |
| B Event Scan Analog Channels | B Event Scan is an A to B trigger sequence that will trigger and capture burst event data of interest asdefined in the B Event Scan setup menu. Captured bits can be scanned in a sequential or randomized fashion, and alternatively the trigger can toggle between two successive B trigger events. Eye diagrams can be constructed with burst data acquired as a result of scanning B Event |
| Glitch Analog Channels MSO Logic Channels | Trigger on or reject glitches of positive, negative, or either polarity. Minimum glitch width is 150 ps (typical) with rearm time of 300 ps |
| Pattern Analog Channels MSO Logic Channels | Trigger when pattern goes false or stays true for specified period of time. Pattern (AND, OR,NAND, NOR) specified for four input channels (and 16 logic channels on the MSO70000 Series) defined as high, low, or don't care |
| Runt Analog Channels | Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again. Event can be time or logic qualified |
| Serial Pattern Analog Channels | Trigger on NRZ-encoded data up to 6.25 Gbaud; above 1.25 Gbaud requires 8b/10b encoded data. Extended with pattern lock triggering to capture repeated acquisitions of long serial test patterns up to 6.25 Gb/s |
| Setup/Hold Analog Channels | Trigger on violations of both setup time and hold time between clock and data present on any two input channels |
| State Analog Channels MSO Logic Channels | Any logical pattern of channels (1, 2, 3) (and 16 logic channels on the MSO70000 Series) clocked by edge on channel 4. Trigger on rising or falling clock edge |
| Timeout Analog Channels MSO Logic Channels | Trigger on an event which remains high, low, or either, for a specified time period. Selectable from 300 ps |
| Transition Analog Channels | Trigger on pulse edge rates that are faster or slower than specified. Slopemay be positive, negative, or either |
| Trigger Delay by Events Analog Channels MSO Logic Channels | 1 to 2 billion events |
| Trigger Delay by Time Analog Channels MSO Logic Channels | 3.2 ns to 3 million seconds |
| Visual Trigger Analog Channels | Trigger when the Visual Trigger expression is satisfied |
| Width Analog Channels MSO Logic Channels | Trigger on width of positive or negative pulse either within or out of selectable time limits (down to 150 ps) |
| Window Analog Channels | Trigger on an event that enters or exits a window defined by two user-adjustable thresholds. Event can be time or logic qualified |
| Bus Decoding Characteristic | |
| Parallel | Data from selected channels is grouped as a parallel, multichannel bus and displayed as a single bus value. Display can be binary, hexadecimal, or symbolic formats |
| I2C | SCLK and SDA channels are displayed as a bus per theInter-Integrated Circuit specification |
| SPI | MOSI, MISO, SCLK, and SS channels are displayed as abus per the Serial Peripheral Interface specification |
| RS-232/422/485/UART | Channel is displayed as a bus |
| USB | Channels are displayed as a bus per the USB specification |
| MIPI®D-PHY | DSI or CSI2 channels are displayed as a bus per the MIPI standard |
| 8b10b Encoded | Control and data characters are displayed as a bus |
| Waveform Processing/Math Measurement | |
| Algebraic Expressions | Define extensive algebraic expressions including Waveforms, Scalars, User-adjustable Variables, and Results of Parametric Measurementse.g. (Integral (CH1 – Mean(CH1)) × 1.414 × VAR1) |
| Arithmetic | Add, Subtract, Multiply, Divide Waveforms and Scalars |
| Filtering Functions | User-definable filters. Users specify a file containing the coefficients of the filter. Several example filter files are provided |
| Frequency Domain Functions | Spectral Magnitude and Phase, Real and Imaginary Spectra |
| Mask Function | Generates a Waveform Database pixel map from a sample waveform. Sample count can be defined |
| Math Functions | Average, Invert, Integrate, Differentiate, Square Root, Exponential, Log 10, Log e, Abs, Ceiling, Floor, Min, Max, Sin, Cos, Tan, ASin, ACos, ATan, Sinh, Cosh, Tanh |
| Relational | Boolean result of comparison >, <,≥,≤, ==, != |
| Vertical Units | Magnitude: Linear, dB, dBm Phase: Degrees, radians, group delay IRE and mV units |
| Window Functions | Rectangular, Hamming, Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian, Flattop2, Tek Exponential |
| Display, Computer, I/O | |
| Display Characteristic | |
| Color Palettes | Normal, Green, Gray, Temperature, Spectral, and User-defined |
| Display Format | YT, XY, XYZ |
| Display Resolution | XGA 1024 horizontal × 768 vertical pixels |
| Display Size | Diagonal: 307.3 mm (12.1 in.) |
| Display Type | Liquid-crystal active-matrix color display |
| Horizontal Divisions | 10 |
| Vertical Divisions | 10 |
| Waveform Styles | Vectors, Dots, Variable Persistance, Infinite Persistance |
| Computer System and Peripherals | |
| Operating System | Microsoft Windows 7 Ultimate – 64 bit OS |
| CPU | Intel Core 2 Duo Processor, 3 GHz |
| PC System Memory | 8 GB |
| Hard Disk Drive | Rear-panel, removable hard disk drive, 160 GB capacity |
| Optional Solid State Drive (Option SSD) | Removable, 160 GB capacity (SSD is standard on 25 and 33 GHz models) |
| CD/DVD Drive | Front-panel CD-R/W, DVD-R drive |
| Mouse | Optical wheel mouse, USB interface |
| Keyboard | USB Interface |
| Input/Output Ports Front Panel | |
| Aux Trigger Input | See trigger specifications |
| DC Probe CalibrationOutput | BNC connector, ±10 V DC for DC probe calibration (signal available only during probe calibration) |
| Fast Edge Output | SMA connector provides fast edge signal. 1 kHz ±20%; 810 mV (base to top) ±20% into ≥10 kΩ load; 440 mV±20% into a 50Ω load |
| Recovered Clock | SMA connector, ≤1.25 Gb/s, Output swing ≥130 mVp-pinto 50Ω at 1.25 Gb/s. Requires Option ST6G or Option MTH to enable on DPO70000 and MSO70000 Series, standard on DSA70000 Series |
| Recovered Data | SMA connector, ≤1.25 Gb/s, Output swing of 1010 repeating pattern 200 mV into 50Ωat 1.25 Gb/s. Requires Option ST6G or Option MTH to enableon DPO70000 and MSO70000 Series, standard on DSA70000 Series |
| USB 2.0 Ports | Allows connection of USB keyboard, mouse, or storage device |
| LAN eXtensions for Instrumentation (LXI) | |
| Class | LXI Class C |
| Version | 1.3 |
| Rear Panel Ports | |
| Audio Ports | Miniature phone jacks for stereo microphone input andstereo line output |
| Aux Trigger Output | BNC connector, 0 to 3 V; default output is A-EventTrigger low true |
| External Time Base Reference In | BNC connector; allows time base system to phase lock to external 10/100 MHz reference. Optimized (by using a software switch) for either a highly stable clock or tracking mode |
| GPIB Port | IEEE 488.2 standard |
| Keyboard Port | PS/2 compatible |
| LAN Port | RJ-45 connector, supports 10BASE-T, 100BASE-T, and 1000BASE-T |
| Mouse Port | PS/2 compatible |
| eSATA Port | External SATA interface for eSATA storage devices |
| Power | 100 to 240 VRMS, ±10%, 50/60 Hz; 115 VRMS±10%,<870 W, 400 Hz; CAT II, <1100 VA typical |
| DVI-I Video Port | Connect to show the oscilloscope display, including live waveforms on an external monitor or projector. The primary Windows desktop can also be displayed on an external monitor using these ports.Alternatively,the DVI-I port can be configured to show the secondary Windows desktop (also called extended desktop or dual-monitor display) DVI connector, female. DVI to VGA 15-pin D-subconnector adapter provided |
| Serial Port | Two DB-9 COM1 ports |
| TekLink® | Synchronizes triggers from multiple Tektronix oscilloscopes together to allow simultaneous acquisition of more than four channels |
| Time Base Reference Out | BNC connector; provides TTL-compatible output ofinternal 10 MHz reference oscillator |
| USB 2.0 Ports | Five on 25 and 33 GHz models, four on all others.. Allowconnection of USB keyboard, mouse, or storage devices |
Tektronix DSA72504D Digital Serial Analyzer Oscilloscope:
Installed Options:
- 2XL: 20 MSamples/ch
- ASM: Advanced Event Search and Mark
- DJA: DPOJET Litter and Eye Diagram Analysis
- MTH Mask testing for Serial Standards. Includes hardware clock recovery for up to 3.125 Gb/s
- PCE3: PCI Express Gen3 Essentials
- PTH1: 3.125 GB/s Serial Pattern Trigger
Includes Accessories As Listed!
BC# -L/T*
Tektronix DSA72504D DSA-72504D Digital Oscilloscope Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- Tektronix DSA72504D Digital Serial Analyzer Oscilloscope w/ Options: (BC# -L/T*)
- Installed Options:
- 2XL: 20 MSamples/ch
- ASM: Advanced Event Search and Mark
- DJA: DPOJET Jitter and Eye Diagram Analysis
- MTH: Mask testing for Serial Standards. Includes Hardware Clock Recovery for up to 3.125 Gb/s
- PCE3: PCI Express Gen3 Essentials
- PTH1: 3.125 GB/s Serial Pattern Trigger
- 2XL: 20 MSamples/ch
- Installed Options:
- Power Cord
- User Manual on CD