Tektronix TekScope THS730A 200MHz Oscilloscope

Tektronix THS730A oscilloscope

The Tektronix THS730A oscilloscope is a graph-displaying device it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.

The Tektronix THS730A oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the moving partsof a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.

Features & Benefits

• 200 and 100 MHz Bandwidth
• 1 GS/s and 500 MS/s Sampling Rates per Channel
• Two Channels and Dual Digitizers
• External Trigger
• 33/4 Digit DMM with Datalogger
• Roll Mode
• Extra Bright Backlit Display
• 8 ns Glitch Capture
• Independently Floating Isolated Oscilloscope and DMM Channels for Safety
• Full Floating Measurement Capability up to 600 VRMS
• Advanced Trigger Delay, Pulse and Video (Line Count and Field Select)
• 21 Automatic Measurements
• RS-232 Programmability/ Communications
• NiCd Battery and AC Adapter
• Deluxe Soft Carrying Case

Applications

• Field or Bench Electronic Troubleshooting
• Floating (Nongrounded) System Measurements

Oscilloscope Functions

• Bandwidth: 200 MHz
• Sample Rate (each channel): 1 GS/s
• Time/Division Range: 2 ns to 50 s/div
• Channels: Two
• Sensitivity: 5 mV to 50 V/div (to 500 V/div with 10X probe).
• Position Range:  ±10 div.
• DC Gain Accuracy:  ±2%.
• Vertical Resolution: 8-Bits.
• Record Length: 2500 points.
• Horizontal Accuracy: ±200 ppm.
• Roll Mode: = 0.5 s/div.
• Autorange: User-selectable.
• Trigger Modes: Auto, Normal.
• Trigger Types: Edge, Pulse, Video, External.
• Video Trigger Formats and Field Rates: Odd field, even field and line.
• External Trigger Input: 5 MHz TTL compatible.
• Waveform Processing: Add, Subtract, Multiply, Calculate Watts = V x I.
• Waveform Storage: 10 waveforms.
• Acquisition Modes: Sample, Envelope, Average, Peak Detect.
• Cursor Measurements: delta Volts, ? Time, 1/? Time (Hz), Degree (phase).
• Cursor Types: Horizontal Bars, Vertical Bars, Paired (volts @ time).
• Display System: Interpolation: Sin(x)/x. Format: YT and XY. Mode: Vector, Dot, Vector Accumulate, Dot Accumulate.

DMM Specifications

• DC Voltage Ranges: 400.0 mV to 880 V.
• DC Volts Accuracy: ±(0.5% of reading + 5 counts).
• True RMS AC Voltage Ranges: 400.0 mV to 640 V.
• Maximum Float Voltage: 600 VRMS CAT II, each channel (probe dependent).
• Resolution: 4000 count, 3-3/4 digits.
• AC Volts Accuracy: ±(2% of reading + 5 counts).
• Resistance Ranges: 400.0 O to 40.00 MO.
• Resistance Accuracy: ±(0.5% of reading + 2 counts); 40 MO: ±(2% of reading + 5 counts).
• Diode Test Range: 0 to 2 V.
• Continuity Check: Audible tone when < 50 O.
• Modes: Min, Max, ?, Max-Min, Avg, Hold.
• Nonvolatile Storage: 10 DMM screenshots.
• External Trigger Input: 5 MHz TTL compatible.
• Vertical Zoom Capability: 2X, 5X, 10X.
• dB Scale: Selectable, referenced from 1 mV to 10 V.
• dBm Scale: Selectable, referenced from 50 O to 600 O.

General Specifications

• Setups: 10 front-panel setups.
• Safety: UL3111-1, CSA1010.1, EN61010-1, IEC61010.1.
• EMC: Meets Directive 89/336/EEC.
• Power: NiCd rechargeable battery pack with AC adapter (both included).
• Battery Life: Approx. 2 hours from full charge.
• Display: Backlit LCD.
• Display Resolution: 320 x 240.

Physical Characteristics

• Width: 177 mm
• Height: 217 mm
• Depth: 51 mm
• Weight: Net 1.45 kg

Having trouble viewing this file? Click this link to download