Trilithic 1G DSP Docsis 3.1 CATV Maintenance Meter
$2,699.00
Availability:
In stock
SKU
WM67
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Trilithic 1G DSP Catv meter Datasheet Specifications
All-In-One Maintenance Meter
Trilithic’s 1G DSP™ conveniently combines CATV, Gigabit Ethernet and Optical testing in a single meter for troubleshooting and maintenance of your entire HFC plant.
Maintaining the health of your plant can now be achieved with one instrument including everything needed for system wide testing. Elim inate the need for multiple instruments with CATV, Gigabit Ethernet, and Optical testing and save capital expenses at the same time.
Tailored for the challenges faced by maintenance technicians, this meter comes equipped with all of the powerful troubleshooting tools for the experienced tech, yet helps simplify decision making and streamlines standard processes and procedures for the more novice tech. This results in more efficient technicians, greater overall system health, and allows techs to continue using the same meter as they become more experienced.
Gigabit Ethernet Testing
Used in combination with either the MetroNet 5001™ or TLB-GbE™, the 1G DSP can achieve throughput testing speeds of up to 1 GbE using a dedicated test port.
The 1G DSP can perform either roundtrip or one-way measurements of Key Parameter Index (KPI) for full Ethernet service testing. With constant payload testing for Layer 2 through Layer 4, the 1G DSP is built for verification of both Ethernet Service Level Agreement (SLA) and Quality of Service (QoS) metrics.
Optical Power Measurement
The 1G DSP™ includes a single input port for measurement of single mode (1310 nm, 1490 nm, and 1550 nm) wavelengths with interchangeable FC, SC, and ST style adapters.
Next Gen Features
The 1G DSP features a large highresolution ultra-bright color touch screen interface, simple pass/fail indicators, and powerful autotest apps to streamline troubleshooting and make the technician’s job easier.
Everything about this next-gen meter was built with the technician in mind, from the included Bluetooth adapter for remote control of the meter via an iPad to the long battery life, quick charge time, and glow in the dark keypad for those dark, cramped spaces. This meter also includes a visual fault locator (VFL) that makes it easy for the technician to locate and identify loss points in patch cords, patch panels, and enclosures.
Autotest Apps
The 1G DSP features next generation autotest applications that practically walk the technician through a job. By performing standardized measurement tests at various required locations on the job site using custom test plans, channel plans and limit sets, the meter very clearly indicates (using color and symbols) what areas still need attention, before the technician leaves the job site.
Multi-user support allows technicians that work in various territories to easily switch channel plans and standardized autotest apps and test limits or login as a completely different user. The built-in web browser allows techs to upload job data in near real-time as well as transmit and receive channel plans, autotests, work orders, and firmware.
Leaving less room for entry error, this new simple user interface can translate into less training and more efficient time in the field for techs. Although the 1G DSP comes equipped with all of the required troubleshooting tools for an advanced maintenance technician, it also offers a higher comfort factor for novice technicians, reducing decision making in the field, which can ultimately result in more productive work days and more satisfied customers.
Justify ROI
Field operations managers can now easily verify that all their technicians are performing the proper tests and are doing so at the right place and time—in near-real time. The potential benefits include identifying techs who need additional training, improving team performance, reducing truck rolls, and cutting operating costs.
At a higher level, ViewPoint can deliver simple, standardized, system-wide reports and dashboards that can help a director or VP of technical operations view the entire operation at a glance to gain information that can be used to reduce service and repeat trouble calls.
Essentially, this integrated system approach allows cable operators to see much more of their plant-wide operations and use the information in practical ways. The insights can enable them to identify both localized problems and highlevel system issues to make decisions based on a clearer understanding of their overall operations and the associated ROI.
Combining 1G DSPs in the field with the new ViewPoint WFM Module in the back office, managers can view the health of their entire system—in near real-time, for total maintenance management.
STANDARD FEATURES
Multiple User Profiles
The Gigabit Ethernet testing feature works in combination with a loopback device to perform BERT loopback measurements of Key Parameter Index (KPI) for full Ethernet service testing.
TOTAL SYSTEM MANAGEMENT
Combining the 180 DSP, 360 DSP, 720 DSP & 1G DSP meters in the field with the new ViewPoint Integrated Server in the back office, managers now have simplified access to intelligent management tools for monitoring, assessing and improving the efficiency of their total operation while making it even easier to obtain consistent, repeatable results that give supervisors that birds-eye view of the field for Total System Management.
By unifying an entire MSO’s field operations in one convenient dashboard, managers can easily verify compliance and quality throughout the entire plant, either by home, system, region, division, or any other attribute from a billing system.
This simple and completely customizable integrated system of field analysis and reporting tools allows managers to watch over their entire field operations in one dashboard, comparing each location in the system, analyzing the overall health of their entire organization, and addressing concerns in near real-time.
STANDARD MEASUREMENT SPECIFICATIONS
For full Trilithic 1G DSP product specifications, please click here: Trilithic 1G DSP
All-In-One Maintenance Meter
Trilithic’s 1G DSP™ conveniently combines CATV, Gigabit Ethernet and Optical testing in a single meter for troubleshooting and maintenance of your entire HFC plant.
Maintaining the health of your plant can now be achieved with one instrument including everything needed for system wide testing. Elim inate the need for multiple instruments with CATV, Gigabit Ethernet, and Optical testing and save capital expenses at the same time.
Tailored for the challenges faced by maintenance technicians, this meter comes equipped with all of the powerful troubleshooting tools for the experienced tech, yet helps simplify decision making and streamlines standard processes and procedures for the more novice tech. This results in more efficient technicians, greater overall system health, and allows techs to continue using the same meter as they become more experienced.
Gigabit Ethernet Testing
Used in combination with either the MetroNet 5001™ or TLB-GbE™, the 1G DSP can achieve throughput testing speeds of up to 1 GbE using a dedicated test port.
The 1G DSP can perform either roundtrip or one-way measurements of Key Parameter Index (KPI) for full Ethernet service testing. With constant payload testing for Layer 2 through Layer 4, the 1G DSP is built for verification of both Ethernet Service Level Agreement (SLA) and Quality of Service (QoS) metrics.
Optical Power Measurement
The 1G DSP™ includes a single input port for measurement of single mode (1310 nm, 1490 nm, and 1550 nm) wavelengths with interchangeable FC, SC, and ST style adapters.
Next Gen Features
The 1G DSP features a large highresolution ultra-bright color touch screen interface, simple pass/fail indicators, and powerful autotest apps to streamline troubleshooting and make the technician’s job easier.
Everything about this next-gen meter was built with the technician in mind, from the included Bluetooth adapter for remote control of the meter via an iPad to the long battery life, quick charge time, and glow in the dark keypad for those dark, cramped spaces. This meter also includes a visual fault locator (VFL) that makes it easy for the technician to locate and identify loss points in patch cords, patch panels, and enclosures.
Autotest Apps
The 1G DSP features next generation autotest applications that practically walk the technician through a job. By performing standardized measurement tests at various required locations on the job site using custom test plans, channel plans and limit sets, the meter very clearly indicates (using color and symbols) what areas still need attention, before the technician leaves the job site.
Multi-user support allows technicians that work in various territories to easily switch channel plans and standardized autotest apps and test limits or login as a completely different user. The built-in web browser allows techs to upload job data in near real-time as well as transmit and receive channel plans, autotests, work orders, and firmware.
Leaving less room for entry error, this new simple user interface can translate into less training and more efficient time in the field for techs. Although the 1G DSP comes equipped with all of the required troubleshooting tools for an advanced maintenance technician, it also offers a higher comfort factor for novice technicians, reducing decision making in the field, which can ultimately result in more productive work days and more satisfied customers.
Justify ROI
Field operations managers can now easily verify that all their technicians are performing the proper tests and are doing so at the right place and time—in near-real time. The potential benefits include identifying techs who need additional training, improving team performance, reducing truck rolls, and cutting operating costs.
At a higher level, ViewPoint can deliver simple, standardized, system-wide reports and dashboards that can help a director or VP of technical operations view the entire operation at a glance to gain information that can be used to reduce service and repeat trouble calls.
Essentially, this integrated system approach allows cable operators to see much more of their plant-wide operations and use the information in practical ways. The insights can enable them to identify both localized problems and highlevel system issues to make decisions based on a clearer understanding of their overall operations and the associated ROI.
Combining 1G DSPs in the field with the new ViewPoint WFM Module in the back office, managers can view the health of their entire system—in near real-time, for total maintenance management.
STANDARD FEATURES
Multiple User Profiles
- Allows up to 5 technicians to share a 1G DSP
- Each technician has his or her own profile, which loads in completely different sets of channel plans, autotest, etc.
- Choose between Ethernet or Bluetooth connection methods
- Provides connection details such as MAC, IP, gateway and DNS
- Shows up to 8 downstream channels and 4 upstream channels
- Provides performance metrics for all downstream and upstream channels
- 650 nm VFL with an operating power of 3 mW designed for both single and multimode cables
- Used to easily locate and identify loss points in patch cords, patch panels, and enclosures
- Create and close out your jobs from this screen
- Shows what channel plan and how many tests have been run on a particular job
- Global configuration settings can be applied to all users of the device while other settings can be tailored to suit each user
- Setting adjustments can be locked out using the ViewPoint software
- Built-In 802.11 “b/g/n” 2.4/5 GHz wireless adapter
- Actively view live signal strengths of Wi-Fi networks in the area
- Provides Wi-Fi details such as SSID, channel and power level
- Provides the ability to measure the optical power of 1310, 1490, & 1550 nm wavelength single mode optical signals
- Performs both absolute and relative measurements
- Shows the analog channel and its associated measurements
- Provides Pass/Fail results for limit sets
- Shows the level, MER and BER of a QAM channel
- Users can change the display to view BER over time, Equalizer Tap and Constellation
- Measure the amplitude of 50/60 Hz, 100/120 Hz, and low frequency interference present on analog or digital channels
- Provides Pass/Fail results for limit sets
- Shows the BER on a graph with a 150 second measurement period
- Shows solid green lines for pre-errors and solid red lines for post-errors
- Shows the level of the analog carrier
- Displays the Carrier to Noise ratio of the analog carrier
- Shows the constellation diagram of the specified QAM channel
- Shows the level, MER and BER and provides Pass/Fail results for limit sets
- Displays the equalizer stress and whether the DOCSIS specification is being broken
- Shows the level, MER and BER and provides Pass/Fail results for limit sets
- Provides the ability to view raw return spectrum traces from 4 to 110 MHz
- Fast DSP spectrum snapshots give the user extreme speed to capture fast transients on the upstream
- Provides the ability to view raw forward spectrum traces from 50 to 1000 MHz
- Fast DSP spectrum snapshots give the user extreme speed to capture fast transients on the downstream
- Determine the distance to cable faults (opens, shorts, splitters, etc.)
- Events shown on a distance versus amplitude display
- Markers to identify the distance and loss at the source of the reflection
- Generate signals in the return path from 5 to 85 MHz
- Continuous wave (CW) or 16/32/64/128/256 QAM signal
- BER error injection for checking the bit stream
- Throughput testing speeds of up to 1 GbE using a dedicated test port
- Roundtrip or one-way constant payload testing for Layer 2-4 for verification of Ethernet SLA and QoS metrics
- Full channel plan scan displays the frequency response of the entire channel lineup
- Provides Pass/Fail results for limit sets and color coded channels, green for digital and blue for analog
- Used to determine if equalization is hiding potential problems within the upstream
- View the pre-equalization of the upstream channel, along with the in-channel frequency response and group delay
- Remote control of the meter via a Class II Mini Bluetooth Adapter (v2.1) with a 10 meter range
- Connect to an iPad that has device tethering enabled by the service provider
- Provides the ability to measure the optical power through the optical transceiver
- Provides link speed, wavelength, Tx power and Rx power measurements of active SFP connection
- Measure the tilt/gain of distribution amplifiers and detect faults in the system that affect these parameters
- Uses the carriers already being carried by the HFC distribution system or a dedicated sweep transmitter in the headend
- Compare local versus headend in one simple view
- Troubleshoot transient/ bursty upstream noise using the fastest, most advanced DSP technology available
- Uses the active cable modem built into the 1G DSP to align the upstream amplifiers
- No headend gear required, pre-EQ must be turned on at the CMTS
- Enables the 1G DSP to communicate with the 8310 RSA Return SpeedSweep Analyzer
- Function as an upstream return path sweep transmitter for troubleshooting microreflections and instances of narrow suck-outs between the test point and the headend
- Tune to downstream QAM channels to display Error Vector Spectrum (EVS)
- Display the ingress underneath an upstream cable modem channel, or any bursty signal
- Includes TraffiControl
- Allows for a high-speed view of ingress in the upstream
- Heat map allows for simplified view of ingress hotspots
The Gigabit Ethernet testing feature works in combination with a loopback device to perform BERT loopback measurements of Key Parameter Index (KPI) for full Ethernet service testing.
TOTAL SYSTEM MANAGEMENT
Combining the 180 DSP, 360 DSP, 720 DSP & 1G DSP meters in the field with the new ViewPoint Integrated Server in the back office, managers now have simplified access to intelligent management tools for monitoring, assessing and improving the efficiency of their total operation while making it even easier to obtain consistent, repeatable results that give supervisors that birds-eye view of the field for Total System Management.
By unifying an entire MSO’s field operations in one convenient dashboard, managers can easily verify compliance and quality throughout the entire plant, either by home, system, region, division, or any other attribute from a billing system.
This simple and completely customizable integrated system of field analysis and reporting tools allows managers to watch over their entire field operations in one dashboard, comparing each location in the system, analyzing the overall health of their entire organization, and addressing concerns in near real-time.
STANDARD MEASUREMENT SPECIFICATIONS
| Level Measurement | |
| Channel Bandwidth | US Models: 6 MHz EURO Models: 8 MHz |
| Amplitude Range | -40 dBmV to +50 dBmV |
| Modulation Types | Analog: NTSC, PAL B/D/G/H/I/K/N & SECAM B/D/G/H/I/K Digital: 16/32/64/128/256 QAM Annex A, 64/256 QAM Annex B |
| Analog Measurement Accuracy | ±0.75 dB @ 77 °F (25 °C) ±2.0 dB from 0 to 122 °F (-18 to 50 °C) |
| Digital Measurement Accuracy | ±0.75 dB @ 77 °F (25 °C) ±2.5 dB from 0 to 122 °F (-18 to 50 °C) |
| Resolution | 0.1 dB |
| Spectrum Measurement | |
| Frequency Range | Return Path: 4 to 110 MHz Forward Path: 50 to 1000 MHz |
| Resolution Bandwidth | 10, 30, 100, and 300 kHz 1 and 3 MHz |
| Display Spans | Return Path: 4 to 42 MHz, 4 to 65 MHz, 4 to 85 MHz or 4 to 110 MHz Forward Path: User-selectable in 1 MHz steps |
| Display Scale | 1, 2, 5, or 10 dB/division |
| Display Range | 8 vertical divisions (when marker bar is hidden) |
| Spurious Free Dynamic Range | 60 dB @ 25? C (77? F) (+50 dBmV) |
| Sensitivity | -40 dBmV (4 MHz to 1 GHz) |
| Digital Channel Measurement | |
| Deep Interleave Compatibility | Yes |
| Downstream MER | 40 dB @ +6 dBmV RF Input Level 34 dB @ -6 dBmV RF Input Level |
| Downstream BER | Method: True BER, derived from code words not from MER Standard: ITU J.83 annex A, B, C Range: 1 E-7 to 1 E-9 @ -6 dBmV RF Input Level |
| Symbol Rates | ≥ 2 msps; ≤ 6.952 msps |
| Cable Modem Measurement | |
| Protocol Support | DOCSIS 1.1 / 2.0 / 3.0 compliant (US & Euro DOCSIS 8x4) SNMP V1, V2c, V3 IEEE 802.3, 802.3u |
| Compliance Certificates | CE mark RoHS compliant CableLabs® wave 80 (DOCSIS 8x4) |
| Receiver Demodulation | Demodulation: 64 QAM, 256 QAM Data rate: Up to 304 Mbps with 8 downstream channel bonding (DOCSIS 8x4) Up to 400 Mbps with 8 downstream channel bonding (EuroDOCSIS 8x4) Channel bandwidth: 6 MHz (DOCSIS) 6/8 MHz (Dual mode 8x4) Maximum modem input signal level: 17 dBmV |
| Transmitter Modulation | Modulation: QPSK, 8 QAM, 16 QAM, 32 QAM, 64 QAM, and 128 QAM (SCDMA only) Data rate: Up to 108 Mbps with 4 upstream channels bonding Frequency (edge to edge): 5 to 42 MHz (DOCSIS) 5 to 65 MHz (EuroDOCSIS) Output level of CM can be controlled by CMTS though power ranging function Step: 1 dB |
| Carrier-to-Noise Measurement (In-service, non-scrambled standard channels only) | |
| Minimum Input Level for Full Range | +10 dBmV |
| Dynamic Range | 50 dB |
| Resolution | < 0.5 dB |
| Tilt Measurement | |
| Max Number of Carriers | 10 |
| High/Low Delta Resolution | 0.1 dB |
| Scan | Video, audio, pilot, and digital carriers |
| Analog & Digital HUM (In-service, non-scrambled standard channels only) | |
| Minimum Input Level | 0 dBmV |
| Range | 0 to 5% |
| Resolution | 0.1% |
| Accuracy | ±0.5% |
| Frequency Domain Reflectometer | |
| Velocity of Propagation | Adjustable from 60.0 to 99.0% in 0.1% increments |
| Working Distance | Minimum: 755 feet (230 meters) @ VoP of 60.0% Maximum: 1247 feet (380 meters) @ VoP of 99.0% |
| Amplitude Range | 0 to -80 dBRL |
| Distance Accuracy | 5 feet |
| Source Generator | |
| Modulation | CW, 16 QAM, 32 QAM, 64 QAM, 128 QAM, 256 QAM |
| Frequency Range | 5 to 85 MHz |
| Amplitude | CW: Adjustable from 10 to 55 dBmV 16/32/64/128/256 QAM: Adjustable from 10 to 45 dBmV |
| QAM Symbol Rates | 0.64, 1.28, 2.56, 5.12 MSPS |
| QAM Source Error Rates | BER: Adjustable from 0 to 1.00E-2 MER: > 38 dB |
| CW Source Accuracy | ±2 dB |
| Optical Power Meter Specifications | |
| Detector | InGaAs (Indium Gallium Arsenide) |
| Port Style | FC, SC, and ST Style Adapters |
| Fiber Size | 9/125 mm |
| Fiber Type | Single Mode |
| Wavelength | 1310, 1490, & 1550 nm |
| Dynamic Range | -70 to 6 dBm |
| Accuracy | ±1.0 dB @ -60 dBm or below ±0.5 dB @ above -60 dBm |
| Resolution | 0.01 dBm, mW, uW, nW |
| Visual Fault Locator (VFL) Specifications | |
| Port Style | FC Style Adapter |
| Fiber Size | 9/125 mm |
| Wavelength | 650 nm |
| Output Power | 3 mW |
| Pulse Duration | CW (always on) or 2 Hz (0.25 sec pulse) |
| Maximum Radiant Power | < 5 mW |
| Turn-On Safety Delay | 2 seconds |
| Physical Specifications | |
| Construction | Rubber overmolded plastic housing |
| Control | Glow in the dark keypad and LCD touch screen and/or via a wireless connection to a mobile device such as a laptop, tablet, iPad® or iPhone®, or Android® handset |
| Display | Color LCD touch screen 800 x 480 pixels (approx 4.5” x 2.75”) |
| Annunciators | Audible annunciator for key strokes |
| Antenna | Internal Wi-Fi antenna, 2 dB gain |
| Dimensions w/o Case (H x W x D) | 8.6 x 6.1 x 2.75 in (21.84 x 15.94 x 6.99 cm) |
| Dimensions w/ Case (H x W x D) | 9.6 x 7.1 x 3.75 in (24.38 x 18.03 x 9.53 cm) |
| Weight w/o Case | 3.25 lbs (1.47 Kg) |
| Weight w/ Case | 4.25 lbs (1.93 Kg) |
| Battery & Power Specifications | |
| Operating Time | 12 hours plus, dependent on use |
| Charge Time | 4 hours |
| Battery | Three 2600 mAh @ 7.2V Li-Ion internal batteries, factory replaceable |
| Power Adapter | Input: 100 to 240 VAC ~ 47 to 63 Hz, 1.1A Max Output: 15 VDC, 4.4A |
| Environmental Specifications | |
| Storage & Operating Temperature | -18? to +50? C (0? to 122? F) |
For full Trilithic 1G DSP product specifications, please click here: Trilithic 1G DSP
Trilithic 1G DSP Docsis 3.1 CATV Meter Gigabit Ethernet Tester
Installed Options:
- 1G DSP
- Dual RF
Trilithic’s 1G DSP™ conveniently combines CATV, Gigabit Ethernet and Optical testing in a single meter for troubleshooting and maintenance of your entire HFC plant.
Includes Carrying Case & Accessories As Listed
1G-DSP 1GDSP
Trilithic 1G DSP CATV Meter 1G-DSP CATV Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 34704-L/T*
- Trilithic 1G DSP CATV Meter Signal Level Meter (BC# 34704-L/T*)
- 1G DSP
- Dual RF
- Cisco SFP-GE-S Transceiver 850nm
- Coax Cable
- Ethernet Cable
- (2) MM LC - LC Duplex Fiber Cables
- Stylus
- AC Adapter/Charger
- Power Cord
- User Manual On CD-ROM
- Carrying Case (G)
Request a Quote for