Trilithic Inc. Model Two CATV Signal Level Meter
$595.00
Availability:
In stock
SKU
WM05
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Trilithic Model Two Signal Level Meter (BC# 35987-L/T*)
- Coax Cable
- AC Adapter/Charger
- User Manual On CD-ROM
- Carrying Case (G)
Request a Quote for
Distribution Signal Level Meter
- Verifies system performance using a complete range of measurements
- Measures analog and digital carrier levels from 5-870 MHz
- 5 to 870 MHz Spectrum analyzer range
- Large, high-resolution display and easy-to-understand user interface
- Ample measurement data storage for unattended test
Designed for the cable test environment while keeping the needs of the installer and field technician in mind, the hand-held Model Twoﾙ signal level meter provides a full complement of measurement functions.
Learned Channel Plans
- The Trilithic Model Two can retain up to five user-defined channel plans.
Special Tilt / Favorites Plan
- Select up to twelve key channels in each User Plan to be included in a Tilt Favorite Channel Plan of the Model Two.
Informative Measurement Modes
- The Trilithic Model Two also measures carrier-to-noise ratios, performs a direct power measurement of QAM signals and even displays the spectrum of the full reverse and forward paths.
Data Storage
- The Model Two saves up to thirty-five Level, Tilt, Spectrum, Channel Scan, Limit Test, and AutoTest measurement data files.
AutoTest Programs
- Groups of tests can be assembled into automatic procedures that can be executed with one keystroke using the Model Two.
Specifications:
| Range | 5 MHz-870 MHz |
| Accuracy | +/- 50 ppm (20° +/- 5°C |
| Resolution | 10 KHz |
Channel Type
| Analog TV | TV |
| Digital TV | QAM, QPSK |
| FM Channel | Single Frequency, Dual Audio Channels |
Level Measurement
| Range | -30dBmV to 60 dBmV (30 dBµV to 120 dBµV) |
| Accuracy (> -25dBmV or 35dBµV) | Level: +/-1.5dB (10°C to 30°C), +/-3dB (-10°C to 40°C) Scan: +/-2dB (10°C to 30°C) |
| Resolution | 0.1dB |
| Input Impedance | 75 Ohms (unbalanced, BNC or F type connector |
| Number of Channels | 150 channels max |
| Scanning Speed | 2.75 channels / sec |
| Scale | 1,2,5,10 dB/div |
| Zoom | 1X, 2X, 3X, 4X, 5X five levels of magnification or full Channel Plan scan |
Frequency Spectrum
| Bandwidth | 2.5 MHz, 6.25 MHz, 12.5 MHz, 25 MHz, 62.5 MHz, and full span |
| Scale | 1,2,5,10 dB/div |
Digital Channel (Average) Power
| Bandwidth | 0.28 to 9.99 MHz |
| Center Frequency | 5 MHz (plus 1/2 Channel bandwidth) to 870 MHz (minus 1/2 Channel bandwidth) |
| Digital Modulation | QAM, QPSK |
Tilt Measurement
| Number of Channels | 4-12 |
| Resolution | 4-12 |
Limit Test Parameters Any of the following may be enabled:
| Min Video | -20 to 59 dBmV (40-119dBµV) |
| Max Video | -19 to 60 dBmV (41-120dBµV) |
| Max ? Video | 2-30 dB |
| Min ? V/A | 0-15 dB |
| Max ? V/A | 5-30 dB |
| Max ? ADJ | 0-20 dB |
| 24HR Video Dev. | 0-20 dB |
AutoTest Up to seven AutoTest Programs, each composed of any combination of Level, Tilt, Spectrum, Limit, and 24HR Video Dev.
| Time Intervals | 1 to 23 hours |
| Test Times | 1 to 10 times |
Test Data Storage Up to 35 complete Scan files (150 Channels max) or 25 complete Limit Test files (150 Channels max); Less if other files (Level, Tilt, Spectrum) are saved
Trunk Voltage Measurement
| Input Range | 1.2-100 VAC, 1.0-100 VDC |
| Accuracy | +/- 1V |
| Resolution | 0.1V |
Other
| Communication Port | RS 232C |
| Printer | Canon, Epson, and HP |
| Audio Output | Built-in speaker |
| Dimensions | 218 mm X 95 mm X 49 mm (excluding belt clip and RF connector) |
| Weight | 1.45 lbs. (658gm) |
| Display | 128 X 128 LCD with backlight |
Power Supply
| Battery | 3.6 V 3.5 AH Ni-MH battery |
| Charger | *AC 100-240 V, 50/60 Hz, 1.8A 7VDC (max) |
| Work Time | Average 6-8 hours (full charge) |
| Charge Time | Less than 3 hours *Only the Trilithic Charger (P/N 0610165000) with internal charging circuitry may be used |
For full Trilthic Model Two product specifications, please click here: Trilithic Model Two