Viavi JDSU ONX-630 One Expert ONX-CATV-D31-S-4285-1012 Docsis 3.1 Tester w/ Forward & Reverse Sweep
$3,859.00
Availability:
In stock
SKU
2A32
Condition: Refurbished / Calibrated
Warranty: 1 Year Warranty
Shipping: USA & Worldwide
- Viavi ONX-630 OneExpert CATV Tester (BC# 9471A-L/T*)
- Viavi ONX-CATV-D31-S-4285-1012 Module (BC# 9471B-L/T*)
- Installed Options:
- Ingress Expert
- NTX Package
- ONX Bluetooth SW OPT
- ONX Docsis 3.1 OFDM
- ONX Docsis 32x8 Bonding
- ONX Forward Sweep
- ONX Mobile SW OPT
- ONX Reverse Sweep
- OneCheck Expert
- Ookla Speedtest
- Reverse Alignment
- RSG Loopback
- Sweepless Sweep
- SWX Package
- TSX package
- VoIP
- Installed Options:
- Coax Cable
- Ethernet Cable
- AC Adapter/Charger
- Power Cord
- User Manual On CD-ROM
- Carrying Case (G)
Request a Quote for
JDSU OneExpert ONX-630 CATV Tester
OneExpertTM CATV helps field technicians fix problems right— the first time. A technician-friendly interface and OneCheck™ automated tests ease complex tasks with a simple dashboard that shows clear pass/fail results. And its future-proof modularity ensures years of use supporting CATV networks.
Comprehensive Tools Increase Productivity
We built expertise into OneExpert so that technicians at any skill level can quickly optimize performance. With a modular platform that adapts easily to rapidly changing technologies, OneExpert CATV is:
- Simple — Auto channel identification eliminates channel plan build, maintenance, and deployment overhead and enables automated testing without the potential for channel plan related test failures
- Fast — OneCheck uses powerful processing and exceptional speed to make more complete testing practical: a tech can run a comprehensive test, including MER and BER on all channels, in about a minute
- Powerful — More intelligent, powerful algorithms running in the background while testing enables the meter to point out any problems and suggest next troubleshooting steps
Benefits:
- Simplifies and speeds testing and troubleshooting
- Improves compliance and audit performance
- Reduces rework
- Turns any technician into an expert
Features:
- Real-time channel identification eliminates the need for channel plans and plan-related errors
- 32x8 DOCSIS® 3.0, DOCSIS 3.1, WiFi, 1 Gigabit Ethernet capable, and TrueSpeed™ option
- Field-exchangeable DOCSIS/RF module
- A unique dual-diplexer design supports 42/85 or 65/204 MHz networks
- WiFi 2.4/5 GHz, Wide Area Personal Network, StrataSync™ enabled
- Simultaneous ingress and downstream testing
Applications:
- Troubleshooting QAM carriers/home networks
- Verifying WiFi in 2.4 GHz and 5 GHz networks
- Turning up business services
- Testing Gigabit DOCSIS services
- Installing PON/RFoG including inspection, power levels, and RF performance
Specifications:
| Frequency | |||
| Range | Diplexer | Upstream | Downstream |
| ONX-630 - Automatically Switching Diplexer | 42/85 | 4 - 42 MHz and 4 - 85 MHz | 54 - 1,004 MHz and 108 - 1,218 MHz |
| 65/204 | 4 - 65 MHz and 4 - 204 MHz | 83 - 1,218 MHz and 258 MHz - 1,218 MHz | |
| Accuracy | ±10 ppm typical @25°C | ||
| Downstream Analysis — Port 1 | |||
| AutoChannel plan builder | Auto detection of channel parameters (analog/digital, symbols, QAM) | ||
| Max input power | 60 dBmV total integrated power | ||
| Operation on powered tap | Operate with up to 90 V AC/DC on input port | ||
| Power detection / notification | Notify of AC/DC power presence on port 2 above 2 Volts | ||
| Return loss | >9 dB | ||
| Upstream Analysis - Port 2 | |||
| Ingress spectrum scan | 0.5 – 204 MHz | ||
| Sensitivity | −45 dBmV | ||
| RBW | 300 kHz | ||
| Min detectable level upstream | −55 dBmV | ||
| Dynamic range | ONX-630 – 60dB | ||
| Max total integrated power | 55 dBmV, 4 – 10 MHz; 60 dBmV, 10 to 204 MHz | ||
| Accuracy | ±2 dB typical at 25°C | ||
| Sampling rate | Hyper SpectrumTM FFT gapless technology - no missed samples, spans 0.5 -110 MHz, 110 to 160 MHz, and 160 to 204 MHz | ||
| Return loss | >9.5 dB | ||
| Operation on powered tap | Operate with up to 90 V AC/DC on input port | ||
| Power detection / notification | Notify of AC/DC power presence on port 2 above 2 Volts | ||
| Upstream Signal Generator | |||
| Number of signals generated simultaneously | From 1 to 8 | ||
| Signal types | signals either all CW or all modulated | ||
| Modulation supported | QPSK, 16 QAM, and 64 QAM | ||
| Symbol rates supported | 5.12, 2.56, 1.28, 0.64, 0.32, and 0.16 Msym/s | ||
| Analog Channel Measurement | |||
| Video and audio levels (dual) | |||
| Standards | NTSC , PAL, SECAM | ||
| Min detectable signal | −50 dBmV (single channel) | ||
| Level accuracy | ±1.5 dB from −20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, −10°C to +50°C | ||
| RBW | 300 kHz | ||
| Carrier to Noise | |||
| Channel types | NTSC , PAL, SECAM, non-scrambled | ||
| Range | 30 to 51 dB (NTSC, 4 MHz measurement bandwidth) | ||
| Required input level | 0 to +40 dBmV with 77 analog channels present, maximum ±15 dB tilt 50 to 1,000 MHz | ||
| Accuracy | ±2.0 dB within specified measurement range ≤ 600 MHz | ||
| Downstream Digital Channel Analysis | |||
| Calibrated power levels | -20 dBmV to +50 dBmV | ||
| Level accuracy | ±1.5 dB from -20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, -10°C to +50°C | ||
| Modulation(s) | 64, 128, and 256 QAM, OFDM | ||
| Annex A: 5.057 to 6.952 MSPS Annex B: 5.057 for 64 QAM and 5.361 MSPS for 256 QAM Annex C: 5.274 MSPS for 64 QAM and 5.361 MSPS for 256 QAM |
|||
| Regional demods | DVB-C | ||
| Full span MER Ingress under carrier — full span ingress noise trace Group delay and in-channel frequency response (ICFR) Digital quality index (DQI) over time Errored/severely errored seconds Level, measured symbol rate, carrier frequency, modulation, interleaver depth |
|||
| Hum Specification | |||
| Hum frequency range | 25 Hz to 1000 Hz | ||
| Minimum MER | 33 dB | ||
| Accuracy up to 5% hum | +/- 0.8% | ||
| From 5% to 10% | +/- 1.0% | ||
| OFDM Signal Performance Metrics | |||
| OFDM Channels | 24 - 192 MHz wide - up to 3 active OFDM channels | ||
| Level - max, min, average, standard deviation | relative to a 6 MHz carrier per CableLabs | ||
| MER - max, min, average, standard deviation, percentile | 12 to 50 dB | ||
| MER channel band graph | max, min, avg across entire OFDM carrier | ||
| Noise | max | ||
| Echo | dBc | ||
| ICFR | in-carrier frequency response (dB) | ||
| Spectrum/IUC | spectrum display, including carrier and ingress under carrier | ||
| OFDM Profile Analysis | |||
| Profiles A, B, C, D, NCP, and PLC (more profiles as implemented) Lock status, codeword errors (corrected and uncorrected) | |||
| DOCSIS Testing | |||
| Supports DOCSIS 3.1 bonding up to 32 SC-QAM + 2 OFDM downstream channels, 8 SC-QAM + 2 OFDMA upstream channels Compliant with CableLabs® specifications for DOCSIS 3.1 Compliant with CableLabs® specifications for DOCSIS 3.0 (32x8 bonding) |
|||
| Displayed DOCSIS Results | |||
| Top level | Number of bonded channels, min receive level, max BER (pre-FEC), min and max MER, max transmit level, max ICFR (in-channel frequency response) | ||
| Details | Downstream SC-QAM (over time charts: level, MER, BER, DQI), Upstream (charts: transmit over time, upstream ICFR, upstream EQ taps | ||
| Service tests | Registration, Throughput, Ping/ Traceroute, Packet Quality; cable modem pass-through | ||
| OFDM | OFDM selected in scan, number of subcarriers, PLC lock status, frequency, level, and MER, CWE (corr, uncorr); OFDM channel(s) - Level variation (max, min, avg), MER variation (max, min, avg), ICFR, profile analysis (locked, CWE corr, CWE uncorr) | ||
| Downstream | |||
| Frequency range | 54/85/108/258 to 1,000/1,218 MHz (dependent on currently active diplexer frequency) | ||
| Upstream | |||
| Frequency range | 5 to 204 MHz (dependent on currently active diplexer frequency) | ||
| OFDMA channels | ≥2, per DOCSIS specification | ||
| Transmit level range (max) | +61 to +48 dBmV depending on modulation format and number of bonded carriers, per DOCSIS specification | ||
| SC-QAM channels | up to 8 per DOCSIS specification | ||
| MER | |||
| Specified range (with input level -5 to +20 dBmV) | 21 to 40 dB, 64 QAM; 28 to 40 dB, 256 QAM; 16 to 44 dB OFDM | ||
| Max displayable range | 50 dB | ||
| Resolution | 0.1 dB | ||
| Accuracy | ±2 dB typical at 25°C | ||
| Minimum lock level | −15 dBmV | ||
| BER - ChannelCheck and DOCSISCheck Mode | Down to 1E-9 (pre and post FEC) | ||
| BER - OneCheck mode | Down to 1E-8 (pre and post FEC) default; 1E-9 user selectable | ||
| Interleaver depth | 128, 8 max | ||
| Display/Interface/Usability | |||
| High-brightness color LCD (800 x 480) | 5 inch diagonal | ||
| Touch screen | Capacitive | ||
| Hard key navigation capable | |||
| Boot time | Approximately 20 sec | ||
| Environmental | |||
| For indoor/outdoor use | IP 54 light rain (0.5 in/hr; 1.27 cm/ hr) | ||
| Pollution | 2° | ||
| Drop | 1m (3.3 ft) onto concrete | ||
| Temp range | Operating −10 to 50°C (14 to 122°F) Storage temp −20 to 60°C (-4 to 140°F) |
||
| Humidity | 10 – 90% RH non-condensing | ||
| RF immunity | 8.5 V/m (for CATV measurements) | ||
| Maximum altitude | 4000 m (13,123 ft) | ||
| Input/Outputs | |||
| RF (2) | F connectors replaceable | ||
| Port 1 | Downstream 54/85/108/258 MHz depending on diplexer | ||
| Port 2 | Upstream 4 – 204 MHz and TDR | ||
| USB host (2) | |||
| Ethernet (2) | RJ45 10/100/1000T | ||
| Power | Polarized | ||
| Remote Access/Connectivity | |||
| VNC accessible via IP address HTTPS file access via IP address Mobile application via Wide Area Personal Network |
|||
| Battery | |||
| Field replaceable 96 W/hr 10.4 V, 10-cell LiIon | |||
| Typical battery life | 6 – 8 hr continuous, 15 – 20 hr typical usage | ||
| Battery charge time | 4 Hrs (90%) 6 - 8 Hrs 100% (AC charger) | ||
| StrataSync Reporting Capability | |||
| Session based (job/work order) file saving of results gathered at TAP, GB, and CPE Measurement screen capture save and recall |
|||
| StrataSync Core | Asset and data management | ||
| StrataSync Plus | Optional extended data management (6 years) | ||
| Weight | |||
| ONX-630 | 5.95 lb (2.7 kg) | ||
| Protective case and shoulder strap | 0.95 lb | ||
| WiFi | |||
| Test interface | 802.11 a/b/g/n (2.4/5 GHz) | ||
| Tests | WiFi scan; WiFi access point (2.4 GHz only) | ||
| Scan results | SSID (secure set identification); Channel; Security setting; Power level; MAC address | ||
| Scan modes | AP list (access point); Channel graph; Time graph | ||
| Access point (IPX, TSX models only) | Configure OneExpert CATV as WiFi access point (Ethernet to WiFi bridge) | ||
For full Viavi ONX-630 CATV Tester product specifications, please click here: Viavi ONX-630