Visual Networks X.21 Interface Inline Probe ASE
$89.95
Availability:
In stock
SKU
1H193
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
- Visual Networks X.21 Interface Univeral Inline Probe (BC# 13757)
- Ethernet Cable
- Power Cord
- RS232 PC Interface Cable
Request a Quote for
Visual Networks Universal Inline Probe
The Visual UpTime® Select? X.21 LinkSafe? inline probe ASE is deployed inline on an access line, typically between a CSU/DSU and customer premises equipment (CPE). It supports Multi-Protocol software for deployment in standard frame relay or HDLC networks and IP Transport software for deployment in frame relay or HDLC-based networks that use IP switching. The ASE supports X.21 connectivity through a X.21 Data Terminal Equipment (DTE) interface on the network side and Data Communications Equipment (DCE) interface on the user side. The ASE operates at data rates up to 2.048 Mbps, deriving timing from the network-side and sourcing timing on the user side. It also includes LinkSafe technology to protect circuit integrity in case of an ASE outage, as well as power failure noti?cation.
Features:
Specifications:
For full Fluke Networks Visual Uptime Select product specifications, please click here: Fluke Networks Visual Uptime Select
The Visual UpTime® Select? X.21 LinkSafe? inline probe ASE is deployed inline on an access line, typically between a CSU/DSU and customer premises equipment (CPE). It supports Multi-Protocol software for deployment in standard frame relay or HDLC networks and IP Transport software for deployment in frame relay or HDLC-based networks that use IP switching. The ASE supports X.21 connectivity through a X.21 Data Terminal Equipment (DTE) interface on the network side and Data Communications Equipment (DCE) interface on the user side. The ASE operates at data rates up to 2.048 Mbps, deriving timing from the network-side and sourcing timing on the user side. It also includes LinkSafe technology to protect circuit integrity in case of an ASE outage, as well as power failure noti?cation.
Features:
- Inband management capabilities
- LinkSafe technology
- Multi-Protocol or IP Transport software
- Service Level Agreement (SLA) metrics
- Voice over IP (VoIP) analysis capability
- Application analysis capability
- LMI spoo?ng
- LAN management port
- Power loss detection
- Realtime events
Specifications:
| General | |
| Dimensions | 8.16? (20.7 cm) x 9.0? (22.8 cm) x 1.62?(4.1 cm) |
| Weight | 2.10 lbs. |
| Data Rate | 0 to 2.048 Mbps synchronous |
| Timing Mode | RD: Always synchronous with SCR SD: Synchronous with SCT or SCTE |
| Envrionment | |
| Operating Temperature | 0° to +40°C (+32° to +104° F) |
| Storage Temperature | -20° to +55°C (-4° to +131°×F) |
| Clearance Requirement | Minimum of 3? (7.62 cm) space on sides. |
| Operating and Storage Humidity | 10% to 80%, noncondensing |
| Power Requirements | |
| Input | 100 to 240 VAC |
| Frequency | 50/60 Hz |
| Input Current Rating | 0.5 amps |
| X.21 User Interface (DCE) | |
| Configuration | DCE for interfacing with DTE |
| Data and Clock Leads | ITU-CCITT X.21 |
| Signaling Leads | ITU-CCITT X.21 |
| Connector | Female 15-pin X.21 connector |
| Signaling | Indicate: Clear to Send control signal to the user interface. Received and terminated by the ASE. |
| X.21 Network Interface (DTE) | |
| Configuration | DTE for interfacing with DCE |
| Data and Clock Leads | ITU-CCITT X.21 |
| Signaling Leads | ITU-CCITT X.21 |
| Connector | Female 15-pin X.21 connector |
| Signaling | Control: Request to Send control signal from the user interface. On while power is applied by the ASE. |
| Serial Port Interface | |
| Baud Rate | 19200 or 9600 bps |
| Parity | 8 data bits, no parity |
| Stop Bit | 1 stop bit |
| Electrical Format | EIA RS-232, DTE |
| Connector | RJ-45 |
| Ethernet 10/100BaseT Interface | |
| Bit Rate | 10 or 100 Mbps |
| Connector | 8-pin modular jack: RJ-48 |
For full Fluke Networks Visual Uptime Select product specifications, please click here: Fluke Networks Visual Uptime Select