JDSU Westover FBP-HD3-2 Fiber Inspection System

HD3 Display

Key Features

• High-resolution 1.8-inch TFT LCD display that can detect 1 µm or smaller scratches and dirt particles
• Ruggedized enclosure for use in any environment
• GripSwitchﾙ mode activates the display when held in-hand and deactivates when released, extending battery life
• Built-in rechargeable NiMH battery pack
• Over 3-hour run time on continuous-ON mode and extended run time in GripSwitch mode
• Low-battery warning LED (illuminates when battery life is < 30 minutes)
• AC adapter (100ﾖ240 VAC/12 VDC) charges NiMH battery and also acts as alternate power supply

Applications

• View clear detailed fiber end face images on 1.8-in video display
• Use with JDSU probe microscope to inspect both bulkhead (female) and patch cord (male) sides of fiber interconnect
• Promote proper fiber handling workflow and practice

HD3 Handheld Display
The HD3 display combines performance and value in a small, durable device that fits comfortably in the userﾒs hand. Used with JDSU fiber inspection probe microscopes, the HD3 provides a highly portable, efficient display for viewing and inspecting fiber connector end faces. With its durable design and rugged enclosure, the HD3 ensures excellent performance during field applications. It features a 1.8-inch thin film transistor (TFT) liquid crystal display (LCD) incorporated into a durable, rugged enclosure, and powered with a rechargeable NiMH battery. An innovative GripSwitch conserves battery life with instant-ON functionality when holding the unit in-hand, and it deactivates, or powers OFF when set down. It is equipped with a continuous-ON feature for hands-free operation.

HD3 Display Specifications

JDSU Westover FBP Probe Microscope

The JDSU Westover FBP-series video probe microscopes provide the ultimate fiber inspection tool. The key components of the probe include an integrated light source, a 1/3-inch complementary metal oxide semiconductor (CMOS) video camera, a focusing mechanism, a single- or dual-magnification (200/400X) control, and an image capture button. It is powered through the universal serial bus (USB) port and uses a blue coaxial light emitting diode (LED) light source with an advanced camera system to produce the highest resolution possible. It fits and operates comfortably and easily in-hand, letting users inspect hard-to-reach connectors that are installed on backside of patch panels or inside optical devices. The focus control is conveniently located on the probe to easily adjust the focus of the fiber image, while the dualmagnification control lets users quickly change between high- and low-magnification views. The probe offers a built-in QuickCaptureﾙ button to instantly capture the fiber end face image on the display, which complements its use with JDSU optical test units.

FBPT Inspection Tips and Adapters
The JDSU interchangeable precision stainless-steel inspection tips enable inspection of every connector type located in bulkheads and patch cords. Their careful design and engineering enables consistent and accurate inspection of fiber, and their unique optics architecture provides true versatility and adaptability for inspecting every connector and application in your network. With over 250 individual tips and adapters specifically engineered for the FBP probe line, JDSU offers the industryﾒs most comprehensive fiber inspection solutions.

The patented JDSU RibbonDrive specialty tips let users inspect high-density, mult-fiber array connectors mounted within a bulkhead adapter. A precision-keyed mating adapter interface secures each mated tip with its connector. The patented panning knobs let users view each fiber individually in both the X- and Y-AXIS.

Features:

• Ergonomic design and controls for easy one-hand operation
• Unique optics architecture and comprehensive selection of precision inspection tips and adapters for inspecting every connector and application
• Patented RibbonDrive inspection tips for inspecting both X- and Y-axis of multi-fiber/ribbon array
• Compatible with a full range of display devices or USB analog-to-digital converter for use with T-BERD/MTS platforms or PC/laptop
• Coaxial illumination provides crisp, clear view of fiber end face conditions

Applications:

• Inspect both the bulkhead (female) and patch cord (male) sides of fiber interconnect as well as optical devices located in hard-to-reach places (transceivers)
• Inspect both simplex and ribbon (multi-fiber) connectors
• Use with a comprehensive selection of precision FBPT tips and adapters to inspect every connector and application

Specifications:

Having trouble viewing this file? Click this link to download