Yokogawa AQ7260 AQ7269 SM MM Fiber OTDR
$4,959.00
Availability:
In stock
SKU
YG03
Condition: Refurbished / Calibrated
Warranty: 1 Year Warranty
Yokogawa AQ7260 OTDR Mainframe
Speed, Ease-of-use Increased Efficiency of Optical Network Testing
The AQ7260 OTDR covers a wide range of applications for the installation and servicing of optical networks, with a variety of OTDR modules and optional units.
Simultaneous Display of Trace and Event Table
After performing an Auto Event Search, the trace and event table are simultaneously displayed on the screen. Alternatively, you can choose to display just a trace or event table on the screen. In the event table, symbols enable you to identify the types of events.
Auto Mode Measurement
By combining Auto Set and Auto Save functions, you carry out a chain of processes automatically such as the following:
Quickly and easily compare traces with the trace fix function. This is a convenient function to observe the characteristic differences in multi-core fibers by core, and quickly check where the core was bended, and the loss characteristics.
Multi Wavelength Continuous Measurement
Multi Wavelength Continuous Measurement is a function that allows you to switch the wavelength being measured while keeping the same measurement conditions. This is convenient when you need to measure two wavelengths in a single fiber.
Features:
Specifications:
Speed, Ease-of-use Increased Efficiency of Optical Network Testing
The AQ7260 OTDR covers a wide range of applications for the installation and servicing of optical networks, with a variety of OTDR modules and optional units.
Simultaneous Display of Trace and Event Table
After performing an Auto Event Search, the trace and event table are simultaneously displayed on the screen. Alternatively, you can choose to display just a trace or event table on the screen. In the event table, symbols enable you to identify the types of events.
Auto Mode Measurement
By combining Auto Set and Auto Save functions, you carry out a chain of processes automatically such as the following:
- Set measurement conditions
- Automatically detects the conditions of the fiber being measured and automatically sets the optimum measurement condition.
- Start measurement
- Starts measuring the average automatically when the measurement conditions are set.
- Start event
- Automatically detects the reflection values, positioning (distance) and the loss incurred when the threshold value exceeds the preset values.
- Save data
- Stores the measurement results automatically into the specified memory.
Quickly and easily compare traces with the trace fix function. This is a convenient function to observe the characteristic differences in multi-core fibers by core, and quickly check where the core was bended, and the loss characteristics.
Multi Wavelength Continuous Measurement
Multi Wavelength Continuous Measurement is a function that allows you to switch the wavelength being measured while keeping the same measurement conditions. This is convenient when you need to measure two wavelengths in a single fiber.
Features:
- Sampling resolution: min. 5cm
- Sampling points: max. 60,000
- 8.4 inch TFT-LCD color display for easy viewing
- Large internal memory: 20MB
- USB Ports for connectivity and data storage
- Compact and light weight: approx 3kg
Specifications:
| AQ7260 OTDR main frame | ||
| Display 1) | 8.4 inch color TFT (640 480 dots) | |
| Horizontal axis | Full-scale | 25m, 50m, 100m, 250m, 500m, 1km, 2km, 2.5km, 5km, 10km, 20km, 40km, 80km, 160km, 240km, 320km, 640km (depend on the optical unit) |
| Shift | 0 to distance range | |
| Readout resolution | min. 1cm | |
| Sample data count | max. 60,000 points | |
| Group refractive index setting | 1.00000 to 1.99999 in 0.00001 steps | |
| Distance measurement | Displays the relative one-way distance between any two given points, in eight digits | |
| Vertical axis | Scale | 0.2dB/div, 0.5dB/div, 1dB/div, 2dB/div, 5dB/div, 7.5dB/div |
| Shift | 0 to 68dB | |
| Read Resolution | Min 0.001dB | |
| Loss measurement | Displays one-way losses in steps of 0.001dB to a maximum of 5 digits | |
| Displays the relative one-way loss, loss per unit length, and splice loss between any two given points on the waveform | ||
| Return-loss measurement function | Return loss at mechanical connectors can be measured Total return loss of a fiber cable or between any two points can be measured |
|
| Memory | Internal Memory | 20MB |
| PCMCIA | For stored measurement waveforms and measurement conditions. (A PCMCIA memory card must be purchased separately.) | |
| Interface | USB (Host Interface) | 2 ports, conforms to USB Rev. 1.0, USB memory (Supports memory without security functions.), keyboard, printer |
| Printer / FDD | Can mount cable less on the back of the optical module cover. (Must purchase an optional unit separately.) | |
| Power requirement | AC Adapter | AC100 to 240V, max. 60W (When using optional printer unit during charging battery) |
| Battery | Li-Ion, Operating time : approx. 6 hours (measurement for 30 seconds in every 3 minutes, using AQ7261 without any optional units, in Power Save Mode) charging time : < 5 hours (Room temperature is 23 °C when the power is OFF.) | |
| Environmental conditions | Operating Temperature | -10 to +50°C (During charging : +5 to +35°C) |
| Storage Temperature | -20 to +60°C | |
| Relative humidity | 95% or less (no condensation) | |
| Dimensions and mass | Approx. 299 (W) 225 (H) 62 (D) mm (Has no projections) Approx. 3kg (Included optical modules. The weight is 3.3kg when AQ7269 is mounted.) |
|
Yokogawa AQ7269 SM MM OTDR Module
| Measured wavelength (nm) | 850/1300 +/- 30 1310/1550 +/-25 |
|
| Measured fiber | GI (62.5/125µ, 50/125µ) SM (ITU-T G.652) |
|
| Distance range (km) | 1, 2, 5, 10, 20, 40, 80 2, 5, 10, 20, 40, 80, 160, 240 |
|
| Pulse width (sec) | 10n, 20n, 50n, 100n, 200n, 500n, 1µ (500ns, 1µs is only 1300nm) 10n, 20n, 50n, 100n, 200n, 500n, 1µ, 4µ, 10µ, 20µ |
|
| Distance sampling resolution | min. 5cm | |
| Distance sampling points | max. 60,000 points | |
| Distance measurement accuracy (m) | Offset error | +/- 1m |
| Scale error | Measured distance X 2 X 10-5 | |
| Sampling error | +/- 1 sampling resolution | |
| Dead zone (m) | Event | Multimode: 2 typ. (At GI 62.5/125µm) Singlemode: 2 typ. |
| Attenuation | Multimode: 7/8 typ. (At GI 62.5/125µm) Singlemode: 7/8 typ. |
|
| Dynamic range (dB) SNR=1, for 3 minutes | Multimode: 22.5/24 (At GI 62.5/125µm) Singlemode: 34/32 (At pulse width 20µs and filter ON) |
|
| Loss measurement accuracy | +/-0.05 dB/dB | |
| Environmental condition | Operating Temperature | 0 to +40°C |
| Storage Temperature | -20 to +60°C | |
| Humidity | 95% or less (no condensation) | |
Yokogawa AQ7260 Mainframe w/
AQ7269 SingleMode 1310 / 1550nm MultiMode 850 / 1300nm OTDR Module
Dynamic Range:
1310 / 1550 nm : 34 / 32 dB
850 / 1300 nm : 22.5 / 24 dB
Includes Carrying Case & Accessories As Listed
AQ 7260 7269 AQ-7260 AQ-7269
Yokogawa AQ7260 AQ7269 AQ-7260 AQ7269 OTDR Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 21197-L/T*
- Yokogawa AQ7260 OTDR Mainframe (BC# 21197-L/T*)
- Yokogawa AQ7269 SingleMode MultiMode OTDR Module
- SM OTDR Source:
- 1310nm
- 1550nm
- FC Connector For SM Source
- MM OTDR Source:
- 850nm
- 1300nm
- ST Connector For MM Source
- SM OTDR Source:
- FC Connector
- (2) SC Connectors
- AQ7269 Module User's Guide
- (2) SM FC-FC Fiber Cables
- (2) MM ST-ST Fiber Cables
- (4) Fiber Wipes
- Battery Pack
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- Hard Copy User Manual
- Strap For Unit
- Carrying Case w/ Strap
Request a Quote for