Yokogawa WT210 Digital Power Meter Single Phase Power Analyzer
Condition: Refurbished/Calibrated
Warranty: 1 Year Warranty
Shipping: USA & Worldwide
- Yokogawa WT210 Single Phase Digital Power Meter (BC# 43873-L/T*)
- (2) 1000V Hard Point Test Leads
- Power Cord
- User Manual On CD-ROM
Yokogawa WT210 Single Phase Digital Power Meter
The WT210/WT230 has five times the high-frequency range and approximately twice the basic accuracy as the previous generations plus a high-speed data acquisition rate and a compact design make this digital power meter highly desirable.
What's New: The WT210 is an Accepted Device by Standard Performance Evaluation Corporation (SPEC) used for Power Efficiency Benchmarking! For North American users please click here to learn more.
Wide Range of 5 mA to 20 A
The built-in 5 mA range lets you measure currents as low as 25 µA. This makes it possible to measure very low currents on such things as intermittent control equipment. The wide current range (5 mA to 20 A) means a single power meter can be used for applications such as Energy Star® measurements, to measure everything from standby-power to rated-power.
Features:
* Maximum input with assured accuracy: 26 A
* Basic accuracy: 0.1%
* DC measurement: 0.5 Hz to 100 kHz frequency range
* Compact design (half-rack size)
* 5 mA range for very low current measurements (model WT210 only)
* Line filter function
* High-speed data update (as fast as 10 readings per second)
* Harmonic measurement function available
* User calibration capability
* Large-current measurement capability using external sensor input
* Basic Characteristics
* Comparison with Former Models
* Easily Acquire and Manage Power Measurement Data from Your PC
Wide Frequency Range
Wide Frequency Range Lets You Work on a Variety of Different Applications
* Low-frequency Equipment
* Low-frequency measurements starting at 0.5 Hz can be used for evaluations of cycloconverters and when a motor are started.
Commercial Power Supplies
* Basic Power Accuracy: 0.1%
* Power accuracy is even better than in fomer WT200/WT130 series.
Inverters
* 100 kHz power frequency range
* Now you can obtain more precise measurements on high-frequency equipment such as inverters.
Accuracy Is Assured Between 1% and 130%
MAX Hold Function for Voltage, Current, and Power *3
This function lets you keep, on the display, voltage and current peak values, voltage and current rms values, and maximum values for active power, apparent power, and reactive power.
In addition to using DC inputs, you can obtain precise measurements of signals containing DC components, such as intermittent signals and half-wave rectification signals.
Constantly Changing Signals
Quick Response with Display Updating as Fast as Every 0.1 Second
With measurement intervals as short as 0.1 second, you can capture transient phenomena with a fine level of detail. You can also reduce the time per measurement for increased through put in production testing.
Noisy Signals
Line Filter Function (fc = 500 Hz)
This function lets you measure fundamental wave rms values for inverter output voltages.
| WT210 Specifications | |
| Voltage input terminal | plug-in terminal (safety terminal structure) |
| External sensor input terminal | BNC connector |
| Basic voltage and current accuracy | 0.1% of reading +0.1% of range |
| Basic power accuracy | 0.1% of reading +0.1% of range |
| Frequency range | DC, 0.5 Hz to 100 kHz |
| Effective input range | 1 to 130% of the rated range |
| Measurement synchronization source | Select from “voltage,” “current,” and “entire period of the display update rate.” |
| Line filter | Yes (cutoff frequency 500 Hz) |
| Frequeny Filter | Yes (cutoff frequency 500 Hz) |
| MAX hold | Yes |
| Peak value display | Yes |
| Average active power during integration | Yes |
| Display update rate | Select 0.1, 0.25, 0.5, 1, 2, 0r 5s |
| Number of displayed digits | select 4 or 5 digits |
| Integration timer time | 10000 hours maximum Resolution 1 s |
| Display update during harmonic measurement | Select 0.25, 0.5,1,2 or 5 s |
| Communication Commands | All communication commands for conventional models can be used except the commands for the 2533E. |
| Communication data format | ASCII and binary |
| Addressable mode B of GP-IB communications | No |
| Baud rate of serial (RS-232-C) Communications | 1200 to 9600 bps |
| Zero-level compensation | Yes |
| Key lock | Yes |
| Power fuse | Yes, part number A1347EF |