Anritsu MS2036A HandHeld VNA Master Vector Network Analyzer

$9,369.00

Availability: In stock

SKU

9S150

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

Shipping: USA & Worldwide

Included

Anritsu MS2036A VNA Master (BC# L/T*)
Armored Test Port Cable
Ethernet Cable
(2) BNC Cables
2GB Flash Card
Battery Pack
DC Car Charger
AC Adapter/Charger
Power Cord
USB PC Interface Cable
User Manual On CD-ROM
Carrying Case w/ Strap

Request a Quote for

Have questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

We are commited to win your business!

Company

E-mail address

First Name

Phone Number

Last Name

Country

Comment

Description

Anritsu MS2036A VNA Vector Network Analyzer

The VNA Master employs vector correction after an open-short-load calibration to ensure accuracy, repeatability, and overall quality of 1-port and 2-port measurements. As an improvement over traditional scalar measurement approaches, the VNA Master removes all the systematic errors associated with the 1-port reflection measurements, including directivity, source match, and reflection tracking. Additionally, the VNA Master removes transmission response errors and transmission source match errors (i.e., a 1-path, 2-port correction) when conducting 2-port transmission measurements. The vector correction of the VNA Master offers superior measurement accuracy for detecting problems or phase matching cables in a convenient handheld product so you can perform VNA measurements anywhere, anytime.

Features:

Two-port vector network analysis (2MHz to 6 GHz)
>42 dB directivity
Smith Charts, Phase, and Group Delay measurements
Broad spectrum analysis (9 kHz to 7.1 GHz)
Wide dynamic range 100 dB typical
Excellent DANL (with preamp): 163dBm in 1 Hz RBW
Superior Single Side Band (SSB) Phase Noise of < 100dBc/Hz at 10 kHz offsets
Fast sweep speed of 200 ms in 10 MHz span

Specifications:

Frequency
Frequency Range:	2 MHz to 6 GHz (operational down to 610 kHz)
Frequency Accuracy:	25 ppm
Frequency Resolution	10 Hz
Data Points:	Low, Medium, High (137/275/551)
Interference Immunity:	On-Channel +17dBm On-Frequency 0 dBm (RF Out), +30 dBc (RF In)
1- Port Power:	High: 0 dBm (typical)
2-Port Power:	High: 0 dBm (typical) Low: -35 dBm (typical)
Corrected Directivity:	42 dB (2 MHz to 6 GHz)
1-Port Accuracy:	= <0.44 + \|20 log(1 ±10–E∆/20)\| dB, typical; E∆ = Directivity – Measured Return Loss
Dynamic Range:	70 dB, 2 MHz to 10 MHz 80 dB, 10 MHz to 3 GHz 70 dB, >3 GHz to 5.5 GHz 65 dB, >5.5 GHz to 6 GHz
Return Loss:	Range: 0 to 60 dB Resolution 0.01 dB
VSWR:	Range: 1 to 65 dB Resolution 0.01
Cable Loss:	Range: 0 to 30 dB Resolution 0.01 dB
1-Port Phase:	Range: –180º to +180º Resolution: 0.01º
Spectrum Analyzer Specifications
Frequency Range:	9 kHz to 7.1 GHz (with MS2036A)
Maximum Continuous Input:	+30 dBm
Tuning Resolution:	1 Hz
Frequency Reference:	Aging: ±1 ppm/10 years Accuracy: ±0.3 ppm (25º C ± 25º C) + aging
Frequency Span:	10 Hz to 7.1 GHz plus 0 Hz (zero span)
Sweep Time:	Minimum 100 ms, 10 μs in zero span
Sweep Trigger:	Free run, Single, Video, External
Resolution Bandwidth:	Bandwidth (–3 dB width) 1 Hz to 3 MHz in 1-3 sequence ±10%; 0-span, 1 Hz to 1 MHz 8 MHz demodulation bandwidth
Video Bandwidth:	(–3 dB width) 1 Hz to 3 MHz in 1-3 sequence
SSB Phase Noise:	–100 dBc/Hz max at 10, 20, and 30 kHz offset from carrier –102 dBc/Hz max at 100 kHz offset from carrier
Amplitude Measurement Range:	DANL to +30 dBm
Absolute amplitude accuracy Power Levels ≥–50 dBm, ≤35 dB input attenuation, Preamplifier Off, –10º C to 55º C	9 kHz to ≤10 MHz, ±1.5 dB >10 MHz to 4 GHz, ±1.25 dB >4 GHz to 7.1 GHz, ±1.75 dB
General
Maximum Continuous Input into Vector Network Analyzer:	Test Port, Type N: +23 dBm, ±50 VDC
Maximum Continuous Input into Spectrum Analyzer:	10 dB attenuation, +30 dBm, ±50 VDC
RF Input VSWR into Spectrum Analyzer:	2.0:1 maximum, 1.5:1 typical (≥10 dB attenuation)
Interfaces:	Type N female RF Connector Type N female RF Out Port and RF In Port (50 Ω) BNC female connectors for external references and external trigger Reverse BNC connector for GPS antenna
RF Detector:	Type N(m) 50 Ω
Display	Bright daylight-viewable color transmissive LCD: Full SVGA, 8 in
Languages	Built-in English, Spanish, Italian, French, German, Japanese, Korean, and Chinese. The instrument also has the capability to have two customized languages installed from Master Software Tools.
Size and Weight
Size:	315 x 211 x 97 mm (12.4 x 8.3 x 3.8 in.)
Weight:	4 kg (9 lbs)
Environmental
Operating:	–10º C to 55º C, humidity 85% or less
Storage:	–51º C to 71º C
Altitude:	4600 meters, operating and non-operating