On Sale! Anritsu MT8220A UMTS Master Analyzer Model MT-8220A Anritsu 8220A

Description

Anritsu MT8220A UMTS Master
A High Performance, Handheld Base Station Analyzer

The portable, powerful solution
RF engineers and technicians in the field need a reliable test solution for installation and maintenance of modern cell sites. This solution should be portable and cost effective, while providing excellent performance. The solution: Anritsuﾒs MT8220A UMTS Master. This portable, powerful solution combines transmitter analyzer functionality for verifying base station transmitter performance and the field-proven Spectrum Master (MS2721A) spectrum analyzer in one lightweight, battery-operated handheld test tool.

Outstanding performance in all frequency ranges for WCDMA/HSDPA and GSM/GPRS/EDGE
The MT8220A is extremely flexible, with frequency ranges targeted to WCDMA/HSDPA and GSM/GPRS/EDGE testing and a spectrum analyzer span that reaches 7 GHz.

Lightweight
Weighing less than 2.9 kgs (6.5 lbs) with its rechargeable Li-Ion battery, the MT8220A moves effortlessly from ground installations to the highest towers, or anywhere that critical measurements are needed.

Transmissive Color Display
The MT8220Aﾒs 21.5 cm (8.5 in.) SVGA color transmissive LCD display screen is easy to read even in the brightest sunlight.

Rugged and Reliable
The MT8220A is designed for portability and built to withstand the rigors of on-site testing.

Efficient
The UMTS Master runs about 3 hours on a single charge. For extended measurement sessions, swap the discharged Li-Ion battery with a spare in seconds without tools.

Eight Built-In Languages
English, Spanish, German, French, Japanese, Chinese, Italian and Korean. Can also customize two additional languages using Master Software Tools.

+43 dBm Maximum Safe Input Level
Survives the toughest RF environments, and handles input power levels to +43 dBm (20W) without damage.

Multiple Markers
Display up to six markers on screen in Spectrum Analyzer mode each with delta marker, noise marker and frequency counter marker capabilities. In WCDMA/HSDPA mode the six markers can display the selected code power, code EVM and type of code.

Spectrum Analyzer Specifications:

Frequency
Maximum Continuous Input	100 kHz to 7.1 GHz
Tuning Resolution	1 Hz
Frequency Reference	Aging ±1 ppm/10 years Accuracy ±0.3 ppm (25ºC ±25ºC) + aging
Frequency Span	10 Hz to 7.1 GHz plus 0 Hz (zero span)
Sweep Time	Minimum 100 ms, 10 µs in zero span
Sweep Trigger	Free run, Single, Video, External
Resolution Bandwidth	(-3 dB width) 10 Hz to 3 MHz in 1-3 sequence ±10% 8 MHz demodulation bandwidth
Video Bandwidth	(-3 dB) 1 Hz to 3 MHz in 1-3 sequence
SSB Phase Noise	-100 dBc/Hz max at 10, 20 and 30 kHz offset from carrier -102 dBc/Hz max at 100 kHz offset from carrier
Amplitude
Measurement Range	DANL to +30 dBm
Absolute amplitude accuracy Power Levels = -50 dBm, =35 dB input attenuation, Preamplifier Off	100 kHz to =10 MHz ±1.5 dB >10 MHz to 4 GHz ±1.25 dB >4 GHz to 7.1 GHz ±1.75 dB
Displayed Average Noise Level (DANL in 10 Hz RBW, 0 dB attenuation, Reference level ﾖ50 dBm, preamp on)	Frequency Typical Max 10 MHz to 1 GHz -153 dBm -151 dBm >1 GHz to 2.2 GHz -150 dBm -149 dBm >2.2 GHz to 2.8 GHz -146 dBm -143 dBm >2.8 GHz to 4.0 GHz -150 dBm -149 dBm >4.0 GHz to 7.1 GHz -148 dBm -144 dBm
Display Range	1 to 15 dB/div in 1 dB steps. Ten divisions displayed
Amplitude Units Log Scale Modes	dBm, dBV, dBmv, dBµV
Attenuator Range	0 to 65 dB
Attenuator Resolution	5 dB steps
Measurements
Channel Power	Yes
Adjacent Channel Power Ratio	Yes
Field Strength	Yes
Carrier to Interference Ratio	Yes
AM/FM/SSB Demodulation	Yes

General Specifications:

Maximum Continuous Input	=10 dB attenuation, +30 dBm (10 dB continuation)
RF Input VSWR	2.0:1 maximum, 1.5:1 typical (=10 dB attenuation)
Internal Time Base Accuracy	±0.3 ppm
Interfaces	Type N female RF Connector BNC female connectors for external reference and external trigger Reverse BNC connector for GPS antenna RJ45 connector for Ethernet 10/100-Base T 2.5 mm 3-wire cellular headset connector
Environmental	MILﾖPRFﾖ28800F Class 2 Operating: -10ºC to 55ºC, humidity 85% Storage: -51ºC to 71ºC Altitude: 4600 meters, operating and non-operating
Safety	Conforms to EN 61010ﾖ1 for Class 1 portable equipment
Electromagnetic Compatibility	Meets European Community requirements for CE marking
Size	31.3 x 21.1 x 7.7 cm (12 x 7 x 2.4 in.)
Weight	2.9 kg (6.4 lbs.)

For full Anritsu UMTS Master MT8220A product specifications, please click here: Anritsu UMTS Master MT8220A

Additional Information

Anritsu UMTS Master MT8220A Handheld Base Station & Spectrum Analyzer 100 kHz to 7.1 GHz Frequency Range

Includes Eagle CKT050A Open/Short/Load Calibration Kit, Carrying Case & Accessories As Listed

Anritsu MT8220A UMTS Master Analyzer MT-8220A UMTS Master Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 16824-L/T*

Included