ILSINTECH Swift F1 SM MM FTTx Fiber Fusion Splicer
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Swift F1 is the highly sophisticated and integrated clad alignment fusion splicer, which has been designed to perform the major 5 multifunctional features systematically: stripping, cleaning, cleaving, splicing and sleeving. They let users check the spliced condition immediately without preparing other tools. (ALLINONE) The Swift F1 has been specially designed for fusion splicing and fusion Splice-On Connector(SOC) of FTTx network applications, which resolves the problems of mechanical connectors. Swift F1 is a way on future splicers.
You don't have to carry the fiber cleaver, thermal stripper and fiber cleaner separately. The High Precision Fiber Cleaver, Automatic Thermal Fiber Stripper, Fiber Cleaner and Heat Shrink Oven are all conveniently mounted on top of the Swift-F1 splicer, this design drastically reduces splicing time.
Swift-F1 is also designed for fusion splice-on connectors. Combination of the five key functions of Swift-F1 with Swift Connector (splice-on connector) enabled solving splice quality, durability, and A/S cost problems of mechanical splice (V-groove) connection. By drastically lowering manufacturing cost of splice-on connector, installation cost is lowered more than 15%; reversing existing idea that splice-on connection is much more expensive than V-groove connection.
Features:
- Stripping
- No scratches from heated stripping
- Stripping time: 1.5 sec
- Over 5kg/f Tensile Strength of fiber after stripping
- Cleaning
- One-touch pump
- Easy to refill cleaning alcohol
- Cleaving
- Single-action cleaving
- Fiber chip collector attached
Specifications:
Fiber alignment | Fixed V-Groove (Clad to Clad) |
Applicable type of fibers | 0.25mm, 0.9mm, 2.0mm, 3.0mm, Indoor cable |
Fiber alignment | Single fiber |
Applicable fiber dimensions | Cladding diameter: 125µm, Coating diameter: 250, 900µm |
Fiber setting and cleaved length | 7.0mm |
Splicing modes | Splice mode: 100, Heater mode: 50 |
Typical Splice Loss | SM: 0.04dB, MM: 0.02dB, DS: 0.06dB, NZDS: 0.06dB |
Return Loss | > 60dB |
Splicing Time | Typical 7 sec |
Splice loss estimate | Available |
Sleeve heating ntime | 15sec (0.9mm fiber), 70sec(indoor, 3.0mm cable), 80sec(Connector) |
Applicable protection sleeve | 60mm, 40mm, 28mm, 32mm |
Storage of splice result | The last 2,000 results to be stored in the internal memory. |
Tension test | 1.96N |
Operating condition | Altitude: 0~5,000m above sea level, Temperature: -10°C~50°C, Humidity: 0~95%, Wind: 15m/s, non-condesning, dust proof, water proof, shock proof |
Dimension | 136(W) x 203(L) x 86(H)mm |
Weight | 1.2kg (Including battery 1.5kg) |
Viewing method and display | Two CMOS cameras and 3.5-inch color LCD monitor |
Fiber view and magnification | X/Y: 170X/190X |
Power supply | DC Lithium plymer battery (DC 14.8V, 1250mAh x2), 100 ~ 240V AC Adapter |
No. of splice cycles with battery | Typical 120 cycles (0.9mm fiber) |
Electrode life | More than 2,500 times |
Terminals | USB |
For full Ilsintech Swift F1 product specifications, please click here: Ilsintech Swift F1
ILSINTECH Swift F1 Fixed V-Groove SingleMode MultiMode Fiber Fusion Splicer
This Unit Has A Very Low Total Arc Count of Only 143!
Swift F1 is the highly sophisticated and integrated clad alignment fusion splicer, which has been designed to perform the major 5 multifunctional features systematically: stripping, cleaning, cleaving, splicing and sleeving
The Swift F1 has been specially designed for fusion splicing and fusion Splice-On Connector(SOC) of FTTx network applications, which resolves the problems of mechanical connectors
Includes Hard Carrying Case & Accessories As Listed
ILSINTECH Swift F1 Swift F-1 Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 20194
- ILSINTECH Swift F1 Arc Fiber Fusion Splicer (BC# 20194)
- Arc Count: 143
- Clauss CFS-2 Fiber Optic Stripper
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- ILSINTECH FI-2 Battery Charger
- HF-250 Fiber Holder Set
- HF-2.5F Fiber Holder Set
- Cooling Tray
- Left & Right Screw On Fiber Holders
- (2) Spare Electrodes
- Tweezers
- Accessory Case
- (2) Battery Packs
- AC Adapter/Charger
- Power Cord
- User Manual On CD-ROM
- Hard Carrying Case