JDSU Acterna HST-3000C Tester Copper VDSL WB2

Acterna HST-3000 Handheld Consumer Services Tester

Improving the installation, maintenance and troubleshooting of DSL services
With a market primed for broadband, operators are rapidly deploying DSL in their networks to deliver multimedia services over the existing copper wire in the local loop. Traditionally, one set of technicians performed individualized tests that qualified the copper while another set conducted DSL services testing and verification. In todayﾒs market, however, operators can no longer afford the time, capital expense, and labor costs to conduct tests separately and incrementally. Furthermore, test solutions must generate results that have a strategic impact throughout an operatorﾒs entire organization. This may include building customer loyalty by locating and fixing problems quickly, improving profitability by performing more tests with less staff, or leveraging workforce productivity by automating processes, methods, and procedures.

The Acterna HST-3000 is a modular handheld tester that can be built to order, to test the copper, test the DSL service and improve the process. Technicians use the HST-3000 copper base instrumentand the copper service interface module (SIM) to qualify, maintain, and troubleshoot the local loop.

Highlights

• A combined tester for Copper and DSL testing
• Lower repeat rates with automated close out tests, scripting/pass-fail tests, and back office integration
• Modular hardware and software architecture is flexible and easily upgraded
• Laptop/PC integration via RS-232, USB, or wireless for easy results transfer
• Intuitive, easy-to-use GUI, lightweight, rugged and water resistant

Instrument Interface Specifications

• Dual TIP/RING and Ground POTS/Copper: Color-coded, shrouded 2mm ﾓmini-bananaﾔ jacks
• 10/100 BT Ethernet jack: 8-pin modular
• Serial port: DB9 female via cable (DCE)
• USB Host
• USB Device
• Bluetooth short-range wireless

General Specifications

• Ruggedness: Survives 3-ft drop to concrete on all sides
• Water-resistance: Splash proof: may be used in heavy rain
• Language: English
• Keypad: Typical 12-button keyboard

Physical Specifications

• Size (H x W x D): 9.5 x 4.5 x 2.75 in
• Weight: 2.7 lb with battery
• Operating temperature: 22°F to 122°F
• Storage temperature: ﾖ40°F to 150°F
• Battery life: 10 hrs. typical usage
• Charging time: 7 hours from full discharge to full charge
• Operating humidity: 10% to 80% relative humidity
• Storage humidity: 10% to 95% relative humidity
• Display: 1/4 VGA monochrome transflective, 3.8-in diagonal (readable in direct sunlight)

VDSL-IN/WB2 SIM - Infineon ADSL2+/VDSL2 Testing Wide Band 2 (Up to 30MHz) Copper Test

Qualifying a very high speed Digital Subscriber Line (VDSL) service that can transport high definition television (HDTV) and triple-play services requires more than a simple Go/No-Go tester. One lightweight, robust, battery-operated JDSU HST-3000 tester equipped with the Infineon Technologies VDSL2 module offers more capability than any other handheld tester on the market. This tester gives both technicians and telco engineers the confidence and the necessary power to complete the job, and get it done right.

Expanded copper testing frequency range

• Tx/Rx Tones ranging from 100 kHz to 30 MHz
• Wideband Noise measurements from +15 to -90 dBm
• Impulse Noise measurements from +15 to -60 dBm
• Spectral analysis with spectral masks and band plans up to 30 MHz (-28 to -150 dBm/Hz)

HST-3000 SIM CU Copper Testing Module

Test the Copper, Test the Service, Improve the Process

Equipped with the Copper Testing option and a copper Service Interface Module , the HST-3000 can quickly troubleshoot the local loop for line impairments that degrade or impair T1 performance. With the HST-3000, technicians can quickly identify and locate cable impairments: shorts, grounds, opens, crosses, bridged taps, wet sections and other high resistive faults. These impairments are easy to access with the HST-3000's advanced time domain reflectometer (TDR), precision digital volt/ohm meter (DVOM) and an accurate resistive fault locator (RFL) to pinpoint troubles prior to circuit installation. Copper test features are optimized for use anywhere on the local loop at the NID, cross box, pedestal, main distribution frame or anywhere a technician might gain access to the local loop to locate the source of trouble.

Test the Copper Test the Triple Play

• DVOM
• TDR
• Balance
• Loads
• OpensComplete copper testing to support VDSL/VDSL2 and triple-play deployments
• Expanded copper testing frequency range
  • Tx/Rx Tones ranging from 100 kHz to 30 MHz
  • Wideband Noise measurements from +15 to -90 dBm
  • Impulse Noise measurements from +15 to -60 dBm
  • Spectral analysis with spectral masks and band plans up to 30 MHz (-28 to -150 dBm/Hz)

JDSU HST-3000C HandHeld Consumer Services Tester

INCLUDED MODULE:
- JDSU HST-3000 SIM VDSL-IN/WB2 Module (VDSL Testing w/ Infineon Chipset & TDR Wide Band 2 Up to 30MHz Copper Testing)

Installed Options:
- Web Browser
- FTP/HTTP Throughput
- IP Suite
- RFL
- User Scripting
- TDR
- VT100 Emulation
- Wide-Band TIMS

Includes Carrying Case & ACcessories As listed

HST 3000 3000C

JDSU HST-3000C VDSL-IN/WB2 Consumer Services Tester HST3000C VDSL-IN/WB2 Consumer Services Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 26053 26054

• JDSU HST-3000C HandHeld Consumer Services Tester w/ Options: (BC# 26053)
  • Web Browser
  • FTP/HTTP Throughput
  • IP Suite
  • RFL
  • User Scripting
  • TDR
  • VT100 Emulation
  • Wide-Band TIMS
• JDSU HST-3000 SIM VDSL-IN/WB2 Module (BC# 26054)
• Test Leads Set
• RJ45 To 5 Clip Cable
• Ethernet Cable
• AC Adapter/Charger
• Power Cord
• Carrying Case (G)

Having trouble viewing this file? Click this link to download