Fluke 92B ScopeMeter Series II 60MHz Oscilloscope
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
ScopeMeter Series II is a battery powered combonation scope and meter designed for measurments on-the-go. Just push the MEASURE MENU button, select one of 30 measurments, and ScopeMeter Series II Automaticly configures itself to take the desired reading.
With ScopeMeter Series II, good waveforms are automatic. While probing from test point to test point, the CONTINUOUS AUTOSET feature instantly adjusts the timebase and amplitude. Manual controls are still there, but Series II is so fast and easy, why use anything else!
Designed with a sealed, ruggedized case, the ScopeMeter Series II performs reliably, even in wet, dusty, or dirty enviroments. And the backlit screen makes for easy readings in brights light and no light situations.
Whether it's an overheating motor, spikeson a circuit, or dimming, flickering lights, the ScopeMeter Series II is ideal for uncovering the source of power quality problems in complex electrical circuits. Series II gives the best accuracy and versatility available in "on-the-go," battery, powered instruments, and measures automatically.
Highlights:
- Dual input channels
- Analog-like backlit display
- Continious autoset
- Full featured true rms multimeter with special modes
- Frequency counter
- Direct access measurment menu
- TrendPlot current clamp scaling
- On-line help messages
- Screen transfers can be made to a PC
- Sealed against the elements and protected by a shock resistant holster
- Simultaneously graph and display Min/Max/Average measurments over time for monitoring trends & intermittents
- Print Directly from ScopeMeter Series II, or download to a PC for further analysis.
Features:
| MHz Bandwidth | 50 |
| Number Channels | 2 |
| Continuous Autoset | ? |
| Measure Menu Automatic Setups | ? |
| Min Max TrendPlot - Long Term Recording | ? |
| Multimeter Display with Full Width Waveform | ? |
| True RMS Volts | ? |
| Continuity Beeper | ? |
| Time/Division (10 ns/div to 60 sec/div) | ? |
| Volts/Division (1mV/div to 100V/div | ? |
| Digital Trigger Delay (Cycles, Events, Time & Zoom | ? |
| Special Multimode Modes (RPM, Temp & More) | ? |
| Scope Input Current Clamp Scaling - Read Amps | ? |
| Glitch Capture - 40 ns | ? |
Specifications:
SCOPE MODE
Continuous Autoset Hands-free signal probing. Continuously follows input sig-nals from 15 Hz-50 MHz (100 MHz In the Model 105) and automatically selects theproper time base, input range and trigger level.
MIN MAX Envelope Mode Record the waveform excursions with a gray scale envelope on both inputs.
40 ns Glitch Detect Sweep speeds 1 ps/div or slower on Input A
Analog-Like Grey-Scale Display
Waveform Average Smoothing up to 256 waveforms, 10 samples in Roll Mode
Vertical
| Frequency response, -3 dB | DC to> 50 MHz; |
| AC coupled | <10 Hz direct, <1 Hz with 10:1 probe |
| Coupling | AC, DC, Ground |
| Rise time | <7 ns |
| Sensitivity (at full 8-bits) | 1 mV to 100V/ div to 1 kV/ dlv with 10:1 probe |
| Current probe scaling | 1 mA/div to 100A/div |
| Modes | A,-A, B, -B, A+B, A-B, A=x B=y |
| Input impedance | 1MO, 25 pF direct,10 MO, 13 pF with 10:1 probe |
| Vertical resolution | 8 bit (256 levels) |
| Accuracy | ±(2%+1 pixel) |
| Sample Rate | 25 ms/s |
| Modes | Recurrent, single shot, roll |
| Ranges | |
| Recurrent | 10 ns to 1s / div |
| Dual input alternating | 10 ns to 20 ps / div |
| Dual input chopped | 50 us to 1s/div |
| Single shot | 100 ns to 1s/div |
| Dual input alternating | 100 ns to 20 ps/div |
| Dual input chopped | 50 ps to 1s/div |
| Roll | 2s to 60s/div |
| Dual input chopped | 2s to 60s/div |
| Accuracy | ±(0.1%+ 1 pixel) |
| Record length | 256 or 512 samples (10 or 20 divisions) |
| Sources | A, B, or external |
| Sensitivity : A or B | <0.5divlo 10 MHz |
| <1.5 div to 60 MHz | |
| <4.0div to 100 MHz | |
| External | +0.2V or 2.0V (TTL level compatible) |
| External Input impedance | 1 MO, 25 pF direct, 10 MO, 13 pF with 10:1 probe |
| Delay time | -20 div to +640 div |
| N-cycle trigger | Re-triggers after 2 to 255 trigger cycles |
| Delay by events | 1 to 1023 events after External trigger |
For full Fluke 92B product specifications, please click here: Fluke 92B
Includes Carrying Case & Accessories As Listed
Fluke 92B Fluke-92B Scopemeter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 28970
- Fluke 92B ScopeMeter Series II (BC# 28970)
- (2) 1000V Hard Point test Leads
- (1) 10:1 250 MHz Voltage Probe sets
- AC Adapter/Charger
- User manual on Cd-ROM
- Carrying Case (G)