Fluke 772 Milliamp mA Process Clamp Meter Non Contact Tester
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Fluke 772 Milliamp Process Clamp Meter (BC# 19601M-L/T*)
- (2) Fluke Hard Point Test Leads
- Carrying Case (G)
Fluke 772 Milliamp Process Clamp Meter
If you need more time in your busy day take a good look at the Fluke 772 mA Clamp Meter. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
Measure mA signals for PLC and control system analog I/O without breaking the loop
- Measures low level dc current
- Correlate process indication with real physical value
Measure output signals from transmitters without breaking the loop
- Maintain and troubleshoot process and automation equipment without breaking the loop
- No disruption to the process
Detachable clamp with extension cable
- Measurements in tight locations
- Enables measurements in difficult situations
Measurement Spotlight
- Illuminates hard to see wires in dark enclosures
- Measurement process is easier and quicker
Measure up to 99.9 mA range non-contact
- Wide range of measurements
- Measures 10 to 50 mA signals in older control systems
Automatic power off
- After 15 minutes and 2 minute automatic off for backlight and spotlight
- Saves battery life
Specifications:
| Influence of earth’s field | < 0.12 mA |
| Battery | (4) 1.5 V, Alkaline, IEC LR6 |
| Working hours | 12 hours @ 12 mA source into 500 ohms |
| Size (HxWxL) | 41.3 mm x 76 mm x 248 mm (1.625 in x 3 in x 9.75 in) |
| Weight | 415 g (14 oz) |
| Operating temperature | -10 °C to 50 ºC |
| Storage temperature | -25 °C to 60 °C |
| Operating humidity | < 90 % @ < 30 °C; < 75 % @ 30 ~55 °C |
| Operating altitude | 0 ~ 2,000 m |
| Storage altitude | None |
| IP Rating | IP 40 |
| Vibration requirements | Random 2 g, 5 Hz to 500 Hz |
| Drop test | Passes 1 meter drop test (except the jaw) |
| EMI, RFI, EMC | Meets applicable requirements in EN61326-1 Note: For current measurement w/jaw, add 1 mA to specification for EMC field strengths of 1 V/m up to 3 V/m |
| Temperature coefficients | 0.1(/°C x specified accuracy for temperature < 18 °C or > 28 °C) |
Sell Your Equipment
At AAATesters we are committed to helping you maximize the value of your surplus, excess and underutilized Test Equipment. We buy Test Equipment of all makes and models.
If you would like to Sell your Equipment, please submit the Request form below.
Reasons to Sell to Us
• Quick & Easy Process to Sell or Trade Equipment
• Get Cash Today! or Trade-in Credit for New or Refurbished Equipment
• Free Shipping - We will Pay for Shipping to us. We can even setup, pack and pickup the Equipment you are selling to us
• Improve ROI, Operational Efficiency, Budget Management, and Planning of your Future Needs