Fluke 787 ProcessMeter DMM Loop Calibrator
$695.00
Availability:
In stock
SKU
10H09
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Fluke 787 ProcessMeter (BC# 43821-L/T*)
- (2) 1000V Hard Point Test Leads
- User Manual On CD-ROM
- Carrying Case (G)
Request a Quote for
Fluke 787 Process Meter
The Fluke-787 ProcessMeter combines a DMM and a Loop Calibrator in one rugged, handheld tool - for about what you would expect to pay for a loop calibrator alone. The 787 starts with the Fluke-87 DMM you know and trust, then adds ability to measure, source, and simulate DC loop current with 0.05% accuracy and 1 micro-amp resolution. When you carry the ProcessMeter, you're ready for any loop troubleshooting or calibration task. And since itﾒs dust- and splash-resistant and EMI-shielded, the 787 can survive in your tool belt.
Features:
General Specifications:
For full Fluke 787 specifications, please click here: Fluke 787
The Fluke-787 ProcessMeter combines a DMM and a Loop Calibrator in one rugged, handheld tool - for about what you would expect to pay for a loop calibrator alone. The 787 starts with the Fluke-87 DMM you know and trust, then adds ability to measure, source, and simulate DC loop current with 0.05% accuracy and 1 micro-amp resolution. When you carry the ProcessMeter, you're ready for any loop troubleshooting or calibration task. And since itﾒs dust- and splash-resistant and EMI-shielded, the 787 can survive in your tool belt.
Features:
- DMM and Loop Calibrator in one tool
- Precision 1000V, 440 mA digital Multimeter
- Measure AC and DC volts, AC and DC current, resistance, continuity, and frequency 0.1% DC voltage accuracy 0.05% DC current accuracy, 1 uA resolution to 30 mA Simultaneous mA and % of scale readout True RMS AC voltage measurement to 1 kHz Frequency measurement to 20 kHz Min/Max/Average/Hold/Relative modes Diode Test and Continuity Beeper
- DC current source / loop calibrator 20 mA current source / simulator Simultaneous mA and % of scale readout Manual Step (25%, Coarse, Fine) plus Auto Step and Auto Ramp
- Clear LCD with backlight; 4,000 counts (30,000 counts for DC current)
- Externally accessible battery for easy battery changes
- V overload protection on V, ohms, frequency
- V overload protection on mA, backed-up by 440 mA 1000V fuse
- Designed to meet 1000 volt IEC 1010 Cat III standards
| Measurement Function | Range and Resolution | Best Accuracy (% of reading + LSD) |
| VDC | 400.0 mV, 4.000V, 40.00 V, 400.0 V, 1000 V | 0.1% + 1 |
| VAC (true RMS) | 400.0 mV, 4.000V, 40.00 V, 400.0 V, 1000 V | 0.7% + 4 |
| mADC | 30.000 mA | .05% + 2 |
| A DC | 1.000 A (0.440A continuous) | 0.2% + 2 |
| A AC | 1.000 A (0.440A continuous) | 1% + 2 |
| Resistance | 400.0 Ohms, 4.000k, 40.00 k, 400.0 k, 4.0 M, 40M | 0.2% + 1 |
| Frequency (0.5 Hz to 20 kHz) |
199.99 Hz, 1999.9 Hz, 19.999 kHz | .005% + 1 |
| Diode Test | 2.400 V (shows diode voltage drop) | 2% + 1 |
| Continuity | Beeps for resistance < approx 100 ohms |
| Output Function | Range and Resolution | Drive Capability | Accuracy (% of span) |
| DC Current Output (Internal battery operation) |
0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up) Over-range to 24.000 mA |
12 V compliance, or, 500 Ohms, @ 20 mA |
.05% |
| DC Current Simulate (Ext. 24 Volt loop supply) |
0.000 to 20.000 mA or 4.000 to 20.000 mA, (selectable at power-up) Over-range to 24.000 mA |
1000 Ohms, @ 20 mA | 05% |
| Current adjustment modes | Manual: Coarse, Fine, 25% step Automatic: Slow Ramp, Fast Ramp, 25% step |
||
General Specifications:
| Maximum voltage applied between any jack and Earth Ground: | 1000 V RMS |
| Storage Temperature: | -40°C to 60°C |
| Operating Temperature: | -20°C to 55°C |
| Temperature Coefficient: | 0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C) |
| Relative Humidity: | 95% up to 30°C; 75% up to 40°C; 45% up to 50°C; 35% up to 55°C |
| Vibration: | Random, 2g, 5-500 Hz. |
| Shock: | 1 meter drop test |
| Safety: | Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No.1010..1-92 Over-voltage Category III |
| Size: | 32 mm H x 87 mm W x 187 mm L (1.25 in H x 3.41 in W x 7.35 in L) |
| Size, with holster and Flex-Stand: | 52 mm H x 98 mm W x 201 mm L (2.06 in H x 3.86 in W x 7.93 in L) |
| Weight: | 369 g (13 oz); with holster and Flex-Stand 638 g (22.5 oz) |
| Battery: | Single 9V Alkaline battery (ANSI/NEDA 1604A or IEC 6LR61) |
| Battery Life: | 50 hours typical (measurement), 12 hours typical (sourcing 12 mA) |
For full Fluke 787 specifications, please click here: Fluke 787