HP Hewlett Packard 8591A Spectrum Analyzer
$1,725.00
Availability:
Out of stock
SKU
9S14
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
Request a Quote for
- HP Hewlett Packard 8591A Spectrum Analyzer w/ Options (BC# 12643)
- 023: EXT Keyboard Port
- 102: TV Trigger
- Armored Test Port Cable
- (2) BNC To BNC Cables
- Hewlett Packard 10855A PreAmp w/ Manual
- (2) HP 85700A 32K Byte RAM Cards
- Antenna
- Assortment Of Connectors
- HP Quick Reference Guide
- Front Cover For Unit
- Carrying Case
Hewlett Packard 8591A 9 kHz - 1.8 GHz Spectrum Analyzer,
The 8591A Spectrum Analyzer covers the range from 1 MHz to 1.8 GHz with a center frequency accuracy of 210 Hz at 1 GHz. Over 100 functions are controlled either from the front panel. Advanced marker functions measure: the 99% power bandwidth of a signal; the 3 dB points of a signal; frequency; amplitude; amplitude and frequency differences on a signal; and highest peaks on a signal. The Next Peak button moves the marker to the next highest signal, simplifying harmonic measurements. Other measurement functions include: percentage AM; signal-to-noise ratio; and the FFT. Store/recall up to nine complete front-panel states in battery-backed RAM.
This unit has the following specifications:
Frequency Range: 1 MHz to 1.8 GHz
Frequency Span Range: 0 Hz (zero span), 10 kHz to 1.8 GHz
Amplitude Range: -63 to +75 dBmV
Impedance: 50 ohm
Standard Features
These performance analyzers share the same ease-of-use features found in the lower-cost HP 8590B and 8592B. In addition, each performance portable comes with a built-in memory card reader that enables you to load HP's custom measurement personalities and measurement data into the spectrum analyzer using 32-Kbyte memory cards. A catalog function allows you to determine the exact content of information stored on your memory cards or within internal memory.
HP8591A Specifications
For full HP 8591A specifications, please click here: HP 8591A
The 8591A Spectrum Analyzer covers the range from 1 MHz to 1.8 GHz with a center frequency accuracy of 210 Hz at 1 GHz. Over 100 functions are controlled either from the front panel. Advanced marker functions measure: the 99% power bandwidth of a signal; the 3 dB points of a signal; frequency; amplitude; amplitude and frequency differences on a signal; and highest peaks on a signal. The Next Peak button moves the marker to the next highest signal, simplifying harmonic measurements. Other measurement functions include: percentage AM; signal-to-noise ratio; and the FFT. Store/recall up to nine complete front-panel states in battery-backed RAM.
This unit has the following specifications:
Frequency Range: 1 MHz to 1.8 GHz
Frequency Span Range: 0 Hz (zero span), 10 kHz to 1.8 GHz
Amplitude Range: -63 to +75 dBmV
Impedance: 50 ohm
Standard Features
These performance analyzers share the same ease-of-use features found in the lower-cost HP 8590B and 8592B. In addition, each performance portable comes with a built-in memory card reader that enables you to load HP's custom measurement personalities and measurement data into the spectrum analyzer using 32-Kbyte memory cards. A catalog function allows you to determine the exact content of information stored on your memory cards or within internal memory.
HP8591A Specifications
| General | |
| Temperature | 0 to +55 C operating; -40 to +75 C storage |
| EMI compatibility: | CISPR Pub. 11 and FTZ 526/527/79 |
| Audible noise: | <37.5 dBA pressure and <5.0 Bels power (ISODP7779) |
| Power requirements: | 86 to 127or 195 to 250 Vrms, 47 to 66 Hz. 103 to 126 Vrms, 400 Hz ",,10% |
| Power consumption: | <300 VA; <100 watts |
| Frequency | Range: 9 kHz to 1.8 GHz (50 0); Reference Aging: ",,2x 10-6 /year Settability: ",,0.5x 10-6 |
| Frequency | Frequency readout accuracy (start, stop, center, frequency) Span ~10 MHz:",,(freqreadout x freq ref error + 3%ofspan+ 20%ofRBW+ 100Hz) Span ;e:10MHz:",,(freqreadout x freq ref error + 3%ofspan+ 20%ofRBW) Marker count accuracy (signal to noise ratio ;e:25dB, RBW/span ;e:0.01) Frequency span <10 MHz: ",,(markerfreq x freq ref error+ counterres + 100Hz) Frequency span >10 MHz: ",,(marker freq x freq ref error + counter res + 1kHz) Counter resolution: selectablefrom 10Hz to 100kHz Frequency span
Noise sidebands: ~90 dBc/Hz at> 10 kHz offset from CW signal (1 kHz RBW, 30 Hz YaW, sample detector); ~ 100 dBc/Hz at >30kHz offset from CW signal (1 kHz RBW, 30 Hz YaW, sample detector) Residual FM: <250 Hz popin 100 ms (1 kHz RBW, 1 kHz YaW) System-related sidebands: <-65 dBc at >30 kHz offset from CW |
For full HP 8591A specifications, please click here: HP 8591A