JDSU HD2 Display w/ FBP Microscope
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
FBP-HD2 Handheld video display with 3.5-in TFT LCD
Features
- High-resolution 3.5-inch TFT LCD display that can detect 1 µm particles and scratches
- Ruggedized, durable enclosure for use in any environment
- GripSwitch? mode activates the display when held in-hand and deactivates it when released, extending battery life
- ~8-hour run time using continuous-ON mode and extended run time in GripSwitch mode
- Low-battery warning LED
- Uses eight AA batteries or AC adapter (100?240 VAC/12 VDC) as alternate power supply
- Available hardwired to FBP or FBE probe or connectorized to FBP probe
HD2 Handheld Display
The HD2 display combines performance and versatility in a durable device that fits comfortably in the user?s hand. Used for field inspection of optical fiber, the HD2 incorporates a variety of features that enable portability and efficiency. All models include a 3.5-inch thin film transistor (TFT) liquid crystal display (LCD) and an innovative GripSwitch that conserves battery life with instant-ON functionality when holding the unit in-hand, and powers OFF when set down. It is equipped with a continuous-ON feature for hands-free operation. With its durable design and rugged enclosure, the HD2 ensures excellent performance during field applications.
Additional features available in certain models include an integrated patch cord microscope (PCM) to inspect male connectors.
Applications
- View clear detailed fiber end face images on 3.5-in video display
- Use with JDSU probe microscope to inspect both bulkhead (female) and patch cord (male) sides of fiber interconnect
- Promote proper fiber handling workflow and practice
HD2 Display Specifications
| Dimensions | FBP-HD2 18.5 x 15.0 x 6.0 cm (7.3 x 5.9 x 2.4 in) |
| Weight (with 8 x AA batteries) |
FBP-HD2: 760 g (26.8 oz) |
| Video display | 3.5-in (88.9 mm) TFT LCD |
| Connector | 4-pin Hirose? for FBP probes; hardwired to FBP or FBE probes |
| Power source | 8 x AA standard alkaline batteries or AC adapter (100?240VAC/12VDC) |
| Power modes | ON (continuous on) GripSwitch (power saving mode) OFF |
| Run time | ~8 hours (continuous on) Extended run time with use of GripSwitch (power saving mode) |
JDSU FBP Probe Microscope
The JDSU Westover FBP-series video probe microscopes provide the ultimate fiber inspection tool. The key components of the probe include an integrated light source, a 1/3-inch complementary metal oxide semiconductor (CMOS) video camera, a focusing mechanism and a single- or dual-magnification (200/400X) control. It fits and operates comfortably and easily in-hand, letting users inspect hard-to-reach connectors that are installed on backside of patch panels or inside optical devices. The focus control is conveniently located on the probe to easily adjust the focus of the fiber image, while the dualmagnification control lets users quickly change between high- and low-magnification views.
FBPT Inspection Tips and Adapters
The JDSU interchangeable precision stainless-steel inspection tips enable inspection of every connector type located in bulkheads and patch cords. Their careful design and engineering enables consistent and accurate inspection of fiber, and their unique optics architecture provides true versatility and adaptability for inspecting every connector and application in your network. With over 250 individual tips and adapters specifically engineered for the FBP probe line, JDSU offers the industry’s most comprehensive fiber inspection solutions.
The patented JDSU RibbonDrive specialty tips let users inspect high-density, multifiber array connectors mounted within a bulkhead adapter. A precision-keyed mating adapter interface secures each mated tip with its connector. The patented panning knobs let users view each fiber individually in both the X- and Y-AXIS.
Specifications:
| Dimensions | 46 x 43 x 140 mm (1.8 x 1.7 x 5.5 in) |
| Weight | 180 g (6.35 oz) |
| Optical magnification | 200/400X |
| Connector type | 4-pin Hirose |
| Camera type | 1/3-in CMOS |
| Light source | Blue LED, internal to probe, 100,000+ hours |
| Lighting technique | Coaxial |
| Focus control | Adjustable, in-probe |
| Power source | Display device, USB port |
| Horizontal field-of-view (FOV) (200X) | 550 μm |
| Horizontal FOV (400X) | 350 μm |
For full JDSU HD2 product specifications, please click here: JDSU HD2
JDSU HD2 Display Unit
&
JDSU FBP Probe Fiberscope
The HD2 display combines performance and versatility in a durable device that fits comfortably in the user’s hand.
Includes Carrying Case & Accessories As Listed
FBP HD2 HD 2 HD-2
Westover HD2-P2-V HD2P2V Fiber Inspection System Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 12524
- JDSU HD2 Display (BC# 12524-L/T*)
- JDSU FBP FiberScope Probe
- FBPT-U25M Connector
- AC Adapter/Charger
- Hard Copy User Manaul
- Carrying Case (G)
- Strap For Unit