Konica Minolta CL-100 Chroma Meter
$1,295.00
Availability:
In stock
SKU
KM07
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Minolta CL-100 Chroma Meter
The Minolta Chroma Meter CL-100 is the most compact and lightweight tri-stimulus color analyzer on the market for measuring light source color. For utmost accuracy, it utilizes three high-sensitivity silicon photocells filtered to match CIE (Commission Internationale de l'Eclairage) Standard Observer response. These cells make simultaneous readings of the light source through an integrating diffuser. Readings are processed by the built-in micromputer and presented digitally on the custom-designed liquid-crystal display. The meter precisely controls measuring time of 100.0 milliseconds for measuring continuous or flickering light sources, such as a CRT.
The hand-held, easy to use Chroma Meter CL-100 is ideal for on-the-spot quality control. Since measurements require only a few seconds, the meter is ideally suited for high-volume applications in both production and laboratory use. Reference colors and calibration standards can be inputted to memory and recalled at any time. The meter can be calibrated to the user's desired standard, and a number of meters can be unified by calibrating to the same standard. The unit is operable by remote control using the included plug. For hard-copy or video presentation, readings can be transferred to a separate data processor through the output cord also included with the meter.
The Chroma Meter CL-100 is powered by a single nine-volt battery for approximately 30,000 individual readings. As the meter is constantly on and ready, there is no need for warm-up before taking measurements. An automatic cancelling feature clears the display approximately three minutes after a measurement is taken or the last key is released.
Specifications:
For full Minolta CL-100 specifications, please click here: Minolta CL-100
The Minolta Chroma Meter CL-100 is the most compact and lightweight tri-stimulus color analyzer on the market for measuring light source color. For utmost accuracy, it utilizes three high-sensitivity silicon photocells filtered to match CIE (Commission Internationale de l'Eclairage) Standard Observer response. These cells make simultaneous readings of the light source through an integrating diffuser. Readings are processed by the built-in micromputer and presented digitally on the custom-designed liquid-crystal display. The meter precisely controls measuring time of 100.0 milliseconds for measuring continuous or flickering light sources, such as a CRT.
The hand-held, easy to use Chroma Meter CL-100 is ideal for on-the-spot quality control. Since measurements require only a few seconds, the meter is ideally suited for high-volume applications in both production and laboratory use. Reference colors and calibration standards can be inputted to memory and recalled at any time. The meter can be calibrated to the user's desired standard, and a number of meters can be unified by calibrating to the same standard. The unit is operable by remote control using the included plug. For hard-copy or video presentation, readings can be transferred to a separate data processor through the output cord also included with the meter.
The Chroma Meter CL-100 is powered by a single nine-volt battery for approximately 30,000 individual readings. As the meter is constantly on and ready, there is no need for warm-up before taking measurements. An automatic cancelling feature clears the display approximately three minutes after a measurement is taken or the last key is released.
Specifications:
| Type: | Hand-held dual function light source solorimeter with CIE-standard digital readout by microprocessor and liquid crystal display |
| Receptor: | 3 Silicon Photocells filtered to detect primary stimulus vaules for blue, green, and red light |
| Spectral repsonse: | Closely approximates CIE (Commission internatiole de Eclairage) colorimetric standard observer curves |
| Color deviation mode: | One channel for memory of reference color (measured or inputted) measured value compared by microprocessor and color deviation displayed on LCD |
| Calibration Standard: | PRESET: Minolta Calibration standard |
| display: | LCD type: 3 digits with decimal and unit identifications as applicable: desired readout selectable by depressing appropriate key before/after reading made; "E9" appears on display when measure value is out of display range; display cancels approx. 3 minutes after last control released |
| Meausuring Range: | 5.1 - 32,700 lx; display blinks when measured value under range, "E0" appears on display when measure value over range |
| Repeatability: | Chromaticity (x, y) ±0.0005 |
| Controls: | Measuring button, Chromaticity mode selector key, data selector key, increase key, decrease key, function key, data output key, calibration selector switch, deviation setting switch |
| Terminals: | Remote control socket, data output terminal |
| Electronic components | Hermetically sealed microprocessor chip; custom designed liquid crystal display gold plated data out and receptor head plug contacts |
| Power source: | One 9V battery, (Eveready 216 or equivalent) |
| Dimensions: | 195 x 72 x 39mm (7-11/16 x 2-13/16 x 1-9/16 in.) |
| Weight | 290 g (10-1/1/4 oz.) Without battery |
For full Minolta CL-100 specifications, please click here: Minolta CL-100
Konica Minolta CL-100 Chroma Meter Tristimulus Color Analyzer
The hand-held, easy to use Chroma Meter CL-100 is ideal for on-the-spot quality control. Since measurements require only a few seconds, the meter is ideally suited for high-volume applications in both production and laboratory use.
Includes Carrying Case & Accessories As Listed
CL 100 CL100
Konica Minolta CL-100 CL 100 Chroma Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 33622
- Minolta CL-100 Chroma Meter (BC# 33622-L/T*)
- Minolta Data Output Cord
- Minolta Turn Adapter
- Minolta CRT Reading Hood
- Calibration Cap
- Strap For Unit
- Carrying Case (G)
Request a Quote for