Olympus 35DL Ultrasonic Thickness Gage
$1,795.00
Availability:
In stock
SKU
OP03
Condition: Refurbished
Warranty: 1 Year Warranty
Olympus 35DL Ultrasonic Thickness Gage
35 and 35DL are used in the majority of applications
The 35 and 35DL can use transducers ranging form 2.25 to 30 MHz, which means that these versatile gages can solve the majority of thickness gaging applications, from very thin to very thick. In general, transducers with higher frequencies and smaller diameters allow measurements of thinner or curved parts and enhance the accuracy of the measurement.
Reduction Rate Measurements
Differential Mode and Reduction Rate Mode are standard features on all models. Differential Mode shows the thickness variation from a pre-set thickness value. Reduction Rate calculates and displays the percent of thickness reduction after a material thinning process. A typical application is automotive sheet steel that is bent and formed to make car body panels.
Material Sound Velocity Measurements
All Panametrics 35 models have the capability to make material sound velocity measurements. This standard feature is useful in applications where the speed of the sound within the material can be correlated to other properties. Typical applications include cast metals to monitor the degree of nodularity, and composites/fiberglass to monitor variations in density. Olympus offers a digital caliper for automatic transfer of measurement thickness.
Application Auto-Recall Simplifies Gaging
Application Auto-Recall simplifies making thickness measurements. Select any of the stored transducers and the 35 gages recall all relevant internal transducer parameters.
Why Ultrasonics?
Ultrasonic measurements are accurate, reliable, and repeatable. Instant digital readings can be achieved by transmitting sound into just one side of a material, making it unnecessary to cut or destroy parts where the opposite slid is difficult to reach and where micrometers or other inspection tools cannot do the job.
Features:
Specifications:
For full Olympus 35DL specifications, please click here: Olympus 35DL
35 and 35DL are used in the majority of applications
The 35 and 35DL can use transducers ranging form 2.25 to 30 MHz, which means that these versatile gages can solve the majority of thickness gaging applications, from very thin to very thick. In general, transducers with higher frequencies and smaller diameters allow measurements of thinner or curved parts and enhance the accuracy of the measurement.
Reduction Rate Measurements
Differential Mode and Reduction Rate Mode are standard features on all models. Differential Mode shows the thickness variation from a pre-set thickness value. Reduction Rate calculates and displays the percent of thickness reduction after a material thinning process. A typical application is automotive sheet steel that is bent and formed to make car body panels.
Material Sound Velocity Measurements
All Panametrics 35 models have the capability to make material sound velocity measurements. This standard feature is useful in applications where the speed of the sound within the material can be correlated to other properties. Typical applications include cast metals to monitor the degree of nodularity, and composites/fiberglass to monitor variations in density. Olympus offers a digital caliper for automatic transfer of measurement thickness.
Application Auto-Recall Simplifies Gaging
Application Auto-Recall simplifies making thickness measurements. Select any of the stored transducers and the 35 gages recall all relevant internal transducer parameters.
Why Ultrasonics?
Ultrasonic measurements are accurate, reliable, and repeatable. Instant digital readings can be achieved by transmitting sound into just one side of a material, making it unnecessary to cut or destroy parts where the opposite slid is difficult to reach and where micrometers or other inspection tools cannot do the job.
Features:
- Velocity and Reduction Rate measurements are standard
- Wide thickness range from 0.08 mm to 635.0 mm (0.0030 in. to 25.0 in.) depending on instrument and material
- Uses contact, delay line, and immersion transducers
- Application Auto-Recall with default and custom setups
- Hand-held; weighs only 0.24 kg (8.5 oz)
- Min/Max Mode
- Hi-Low alarm
- English and metric display (inches/mm)
- Multi-language user interface
- Long battery life
- Most thick or sound-attenuating materials
- Thick cast metal parts
- Thick rubber tires, belts
- Fiberglass boat hulls, storage tanks
- Composite panels
- Resolution of 0.01 mm or 0.001 in
Specifications:
| MEASUREMENTS | |
| Mode 1: | Time interval between excitation pulse and first back wall echo, using contact transducers. |
| Mode 2: | Time interval between the first interface echo after the excitation pulse and the first backwall echo, using delay line or immersion transducers |
| Mode 3: | Time interval between successive back wall echoes following the first interface echo after the excitation pulse, using delay line and immersion transducers. |
| Measurement Types: | Thickness, Velocity, or Time of Flight |
| Thickness Measurement Range: | 0.003 - 25 inches (0.08 - 635 mm) (Thickness range depends on model, material, transducer, surface condition, and setup selected.) |
| Material Velocity Range: | 0.02000 - 0.7362 inch/µs (0.5080 - 18.699 mm/µs) |
| Resolution (keypad selectable): | LOW: 0.01ﾔ (0.1 mm) STANDARD: 0.001ﾔ (0.01 mm) HIGH: 0.0001ﾔ (0.001 mm) (35 & 35DL) |
| Time of Flight Measurement Range: | 0.0 - 109.5 µs |
| Time of Flight Resolution: | Fixed at 000.01 µs |
| Measurement Update Rate: | 4, 8, 16, or Max Hz (16-20 Hz depending on application and measurement mode) |
| Transducer Frequency Range: | 2.25 - 30 MHz (35 & 35DL) |
| Min/Max Mode: | Displays current thickness, minimum or maximum thickness depending on setting |
| Display Hold/Blank: | Displays blanks after last reading or holds reading. |
| Alarm Mode: | Programmable Hi-Low alarm set points with audible and visual indicators |
| Differential Mode: | Displays thickness difference between actual measurement and reference value. |
| Reduction Rate Mode: | Displays thickness and percent difference between actual measurement and reference value. |
| Application Auto-Recall: | Automatically adjusts internal parameters for various default and custom transducer setups. 35DL |
| Other Standard Features: | Calibration Lock Mode, Internal Diagnostic Test Mode, Metric/English Units, On-board Statistics |
| POWER SUPPLY | |
| Battery: | 3 AA alkaline or NiMH batteries |
| Operating Time: | 150 hours typical battery life; 30 hours continuous with backlight on |
| Low Battery Indicator: | Continuously indicates battery status. |
| Battery Saver: | Auto Power Off/ Continuous On |
| AC Power Supply: | Optional |
| GENERAL | |
| Environmental IP-65 compliant: | Splash-proof, impact-resistant case. Sealed, color-coded keypad with tactile and audible feedback |
| Operating Temperature Range: | -10°C to +50°C (+14°F to 122°F) |
| Size: | 3.31ﾔ W x 6.0ﾔ L x 1.50ﾔ H (84 x 152 x 84 mm) |
| Weight: | 8.5 oz. (0.24 kg) |
| Custom Language Utility: | Allows translation of display text in many languages. |
| 35DL INTERNAL DATA LOGGER | |
| Data Logger: | The 35DL & 35DL-HP identify, store, recall, clear, and transmit thickness readings and transducer setup information via the USB port or optional RS-232. |
| Max. # of Stored Values: | Over 8,000 or 350 waveforms with thickness readings (with Waveform Option) |
| Stored Data Documentation: | Each saved thickness reading is fully documented with measurement status flags and a setup number that identifies parameters such as velocity, transducer, etc |
| File Name Length: | 8 alphanumeric characters |
| Identification Codes: | 10 character alphanumeric Identification Code system identifies or locates stored data |
| 4 File Templates: | Incremental, Sequential and 2D Grid. Manual files from PC. |
For full Olympus 35DL specifications, please click here: Olympus 35DL
Olympus 35DL Ultrasonic Thickness Gage
Installed Options:
- Thickness
- Velocity
- TOF (Time of Flight)
Wide thickness range from 0.08 mm to 635.0 mm (0.0030 in. to 25.0 in.) depending on instrument and material
Can use transducers ranging from 2.25 to 30 MHz, which means that these versatile gages can solve the majority of thickness gaging applications, from very thin to very thick
Includes Carrying Case & Accessories As Listed
Olympus 35DL 35 DL Corrosion Thickness Gague Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 20720-L/T*
- Olympus 35DL Ultrasonic Thickness Gage w/ Options (BC# 20720-L/T*)
- Thickness
- Velocity
- TOF (Time of Flight)
- Test Lead Thickness Probe
- USB PC Interface Cable
- User Manual On CD-ROM
- Carrying Case (G)
Request a Quote for