Westover HD1 HandHeld Display for Fiber Inspection
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
HD1 Hand-Held Display
Bright, hight contrast 2.5" TFT active matric LCD Display. The probe's hight magnification projects a 530-micron field onto the LCD display. The Auto-Shutoff Interval switch can be set to one of three settings: 10 sec., 30 sec., or Infinity. Pressing the On/Off switch will turn the LCD display On for the set interval time. Pushing the switch again, turns Off the display.
Battery Power and Recharge
The display utilizes a NiMH rechargable battery pack. From a full charge, the system can operate continuously for approximately 3 hours. You can ectend the battery life by using one of the two display's Auto-Shutoff Interval settings. The system's "Low Battery" indicator signals when the battery runs low. (Approximately 15 minutes before automatic shutdown. After this time, the battery must be recharged.) Use external power (AC power adapter) to charge the battery pack. Typical battery charging time is approximately 2-3 hours.
AC Power
Using the AC power adapter has the following advantages:
- Saves internal battery power for portable operation later.
- Charges internal battery pack.
- Allows extended operation.
The two LED's on the front of the Hand-Held display, indicates the display's AC Power and Battery Power status.
For full Westover HD1 product specifications, please click here: Westover HD1
EXFO FBP-HD1 Hand-Held Fiber Inspection Display Unit
Inspect installed connectors that are located inside hardware devices without accessing the "backside" of patch panels.
Includes Carrying Case & Accessories As Listed
Westover HD-1 HD1 Fiber Inspection Display Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 41986
- Westover HD1 Hand-Held Display Unit (BC# 41986)
- AC Adapter/Charger
- User Manual On CD-ROM
- Carrying Case (G)