FiTel S153A V2 SM MM V-Groove Fiber Fusion Splicer S-153

FiTeL S153A Version 2 Fusion Splicer
The S153A Active 3 Axis Cladding Alignment Fusion Splicer has been enhanced and updated to version 2. The battery is automatically charged internally when connected to AC mains power even during operation. The new illumination lamp lights up a wide area around the V-grooves and helps operation in low light environment. The redesigned and strengthened heater simplifies the protection sleeve loading process.

S153A is the first choice for low cost field splicing equipment. The Active V-Groove technology used on the S153A delivers low loss splices with ease while eliminating common Fixed V-Groove splicing errors.

Using the rugged metal body, the S153A is designed to endure harsh operating conditions by improving shock/impact resistance with rubber pads embedded on 4 corners of the splicer body. It also achieves water resistance compliant to IPX2 and dust resistance compliant to IP5X.

Another key feature of the S153A is the significantly reduced operation time. Protection sleeve shrink time is mere 25 seconds, while splicing requires only 9 seconds. Power saving technology used in these machines allows up to 200 splicing cycles (splicing and heating) with 2 built in rechargeable batteries. By combining ease of use, improved speed, precision, durability and portability, the S153A Fusion Splicer becomes your first choice for a versatile low cost splicer with a wide range of applications.

Features:

• Internal battery charging
• Illumination lamp lights up a wide area around V-grooves
• User friendly LCD display offers 4 different X/Y image layouts
• Simplified splice result indicator red / green icon
• Active V-groove, More Reliable than conventional Fixed V-groove machines
• Rugged and compact hand held design to endure harsh environmental conditions
• Fast splice (9 sec) at super low loss and Fast Heating (25 sec)
• 200 cycles (Splicing & Heating) with Internal batteries
• Splice programs available for All METRO/LAN/FTTx fibers including ultra bend-insensitive fibers (e.g. EZ-BendTM)
• Splicer is compatible with the Seikoh Giken and Diamond Spliceon-connector (SOC)
• Easy maintenance electrode replacement/mirror free alignment system
• Easy Software upgrade via the Internet
• Simplified program fusion and heater programming
• Easily exchanged fiber holder systems (Tight holder/Removable fiber holder/ SOC holder)
• PC interface software to allow user manage splicing programs and results
• Auto-start heater oven option
• Improved GUI enhancing ease-of-use
• Large memory for storing 2,000 splice records and last 100 splice result images
• RoHS compliant

Specifications:

Applicable Fibers	SM (ITU-T G.652), MM (ITU-T G.651), DSF (ITU-T G.653), NZD (ITU-T G.655), BIF/UBIF (Bend insensitive fiber, ITU-T G.657)
Cladding Diameter	80 ~ 150 μm
Coating Diameter	100~1,000 μm
Fibers Cleave Length	5 ~ 16 mm
Typical Splice Loss	SM: 0.04 dB, MM: 0.02 dB, DSF: 0.06 dB, NZD: 0.06 dB
Splice Time	9 seconds (semi-auto mode) 11 seconds (regular mode)
Heat Time	25 seconds (S922: 40 mm Sleeve, S921: 60 mm Sleeve) (Pre-heat mode) 31 seconds (S922: 40 mm Sleeve, S921: 60 mm Sleeve) (regular mode)
Splice Programs	Up to 150
Heat Programs	Up to 18
Automatic Heating Start	Available
Applicable Sleeves	20/40/60 mm
Fiber Holding	Tight holder (Loose tube applicable) or Fiber Holder System
Tension Test	1.96 N
Fiber Image Magnification	76X, 235X
Splice Memory	Max. 2,000
Image capture Capacity	Last 100 images to be automatically captured + Up to 24 images to be stored permanently
Dimension	127W × 199D × 105H mm (not including shock absorber) 159W × 231D × 130H mm (including shock absorber)
Weight	1.7 kg (without battery), 2.1 kg (with two batteries)
Monitor	3.5” color LCD monitor
Data Output	USB ver. 2.0 mini
Battery Capacity	Typical 80 splice/heat cycles with single battery Typical 200 splice/heat cycles with 2 batteries
Altitude	5,000 m
Operating Temperature	-10 to +50°C (0 to 95% Relative Humidity [Non-Condensing])
Storage Temperature	-40 to +60°C (0 to 95% Relative Humidity [Non-Condensing])
Power Source	AC Input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V
Wind Protection	Max. wind velocity of 15 m/s
Humidity	0 to +95% RH (non-condensing)

For full FiTeL S153 V2 product specifications, please click here: FiTeL S153 V2
 

Having trouble viewing this file? Click this link to download